Fuzzy PD-sliding mode control design for networked system with time delays

This research specifically addresses the problem of sliding mode control (SMC) in a particular group of T-S fuzzy systems that experience output disturbances and time delays using a networked control system. First, a model for a proportional-derivative sliding mode observer (SMO) is established, subsequently followed by the design of a controller based on SMO to maintain closed -loop system stability. The authors establish a novel mechanism to optimize the bandwidth utilization of the communication network by introducing a newly adjusted event -triggering parameter. After that, addressed a linear matrix inequality (LMI) problem to determine the controller gain and observer coefficients. This was done to guarantee the asymptotic stability of the closedloop plant. Furthermore, the authors were able to directly identify the disturbances for these plants using the proposed descriptor SMO . Moreover, a parameter -based novel event -triggered scheme , along with a new resultant closed -loop system, will be employed to modify trigger frequency parameters within a unified framework. The controller gains will be determined by solving a linear matrix inequality, subject to certain conditions that ensure sufficiency. These conditions will be deduced to ensure asymptotic stability. In the final section, the authors presented examples from the Wind Energy System (WES) that illustrate the feasibility and effectiveness of our proposed methodology.