A comprehensive study on the microstructure evolution and mechanical property characterization of selective laser melted 18Ni300 stainless steel during heat treatment processes

The influence of different heat treatment processes on the microstructure and mechanical properties of 18Ni300 stainless steel manufactured by selective laser melting has been investigated in the present study. The microstructures, nanoprecipitates, and mechanical properties of the differently heat-treated samples were analyzed using various precision instruments. Compared with a non-treated 18Ni300 stainless steel sample, the results showed that the microstructure was mainly composed of fine lath-like martensite, with a large number of nanoprecipitates dispersed both within the martensite and in the boundaries. In addition, there was a preserved amount of austenite between the lath-like martensite and the spherical nanoprecipitate in the SAT sample. The interactions between the martensite matrix and the nanoprecipitates and dislocations were assumed to be the main reason for the high strength of 18Ni300 stainless steel. These precipitates included rod-shaped or needleshaped, Ni3Ti, Ni3Mo, and Ni3(Ti, Mo) nano-precipitates, as well as spherical Ti-Al nano-oxidized precipitates and massive Ni-rich precipitates. The shear and by-pass mechanisms between the strengthened nano-precipitate and the dislocations were found to depend on the size of the nanoprecipitate. The influence of the nanoprecipitation on the indentation hardness became more evident after heat treatment, but the effect on the indentation modulus was not that obvious. The AT- and SAT-treatments significantly improve the strength, hardness, and modulus of samples but were found to reduce the toughness and plasticity. After the AT- and SATtreatments, the protrusions became smaller, and the small isometric protrusion of a shear lip became significantly smaller than for the as-built material.