A Review of End-of-Life Scenarios for Fibre-Reinforced Polymer Materials

被引:1
|
作者
Zieminska-Stolarska, Aleksandra [1 ]
Sobulska, Mariia [1 ]
Pietrzak, Monika [2 ]
Zbicinski, Ireneusz [1 ]
机构
[1] Lodz Univ Technol, Fac Proc & Environm Engn, Wolczanska 213, PL-93005 Lodz, Poland
[2] Lodz Univ Technol, Fac Chem, Zeromskiego 114, PL-90543 Lodz, Poland
关键词
Fibre-Reinforced Polymer (FRP); environmental load; End-of-Life scenario (EoL); Life Cycle Assessment (LCA); carbon footprint; global warning potential; CARBON-FIBERS; ENVIRONMENTAL ASSESSMENT; COMPOSITES; WASTE; RECOVERY; PYROLYSIS; ENERGY; PERFORMANCE; REUSE;
D O I
10.3390/en17153713
中图分类号
TE [石油、天然气工业]; TK [能源与动力工程];
学科分类号
0807 ; 0820 ;
摘要
The paper presents a review of End-of-Life scenarios (EoL) (disposal, incineration, chemical, thermal and mechanical recycling) compared to the production stage of Fibre-Reinforced Polymers (FRPs) of composites regarding global warming potential. Innovative FRP manufacturing technologies (vacuum infusion, ultraviolet curved pultrusion, hot stamping, three-dimensional printing and automatic tape placement) commonly used in the shipbuilding industry were environmentally assessed. The materials, energy flows and waste discharged to the environment over the whole life cycle were collected, identified and quantified based on Life Cycle Assessment (LCA) analysis in the frame of the Fibre4Yards project. The results of LCA calculations show that waste management (the EoL scenario) contributes 5 to 39% of the total carbon footprint for FRP technologies. The highest contribution of the EoL scenario was found for technologies where polypropylene was applied, i.e., 33 and 38% of the total CO2 emissions. Our analysis of the literature and information from industrial partners confirm that the standard and most common waste scenario for FRP materials and compounds is still incineration and landfilling.
引用
收藏
页数:14
相关论文
共 50 条
  • [1] Sustainability considerations for end-of-life fibre-reinforced plastic boats
    Geraghty, Ruadan
    Graham-Jones, Jasper
    Pemberton, Richard
    Summerscales, John
    Bray, Simon
    REGIONAL STUDIES IN MARINE SCIENCE, 2025, 83
  • [2] Advances in the circularity of end-of-life fibre-reinforced polymers by microwave intensification
    Julian, I.
    Garcia-Jimenez, A.
    Aguado, A.
    Arenal, C.
    Calero, A.
    Campos, V.
    Escobar, G.
    Lopez-Buendia, A. M.
    Romero, D.
    Verdejo, E.
    Garcia-Polanco, N.
    CHEMICAL ENGINEERING AND PROCESSING-PROCESS INTENSIFICATION, 2022, 178
  • [3] Thermal reshaping as a route for reuse of end-of-life glass fibre-reinforced acrylic composites
    Obande, Winifred
    Stankovic, Danijela
    Bajpai, Ankur
    Devine, Machar
    Wurzer, Christian
    Lykkeberg, Anna
    Garden, Jennifer A.
    Bradaigh, Conchur M. O.
    Ray, Dipa
    COMPOSITES PART B-ENGINEERING, 2023, 257
  • [4] Fibre-reinforced polymer repair materials - some facts
    Alsayed, SH
    Al-Salloum, YA
    Almusallam, TH
    PROCEEDINGS OF THE INSTITUTION OF CIVIL ENGINEERS-CIVIL ENGINEERING, 2000, 138 (03) : 131 - 134
  • [5] Quality assessment of life cycle inventory data for fibre-reinforced polymer composite materials
    Moutik, Badr
    Summerscales, John
    Graham-Jones, Jasper
    Pemberton, Richard
    SUSTAINABLE PRODUCTION AND CONSUMPTION, 2024, 49 : 474 - 491
  • [6] A review on cotton fibre-reinforced polymer composites and their applications
    Wankhede, Bipin
    Bisaria, Himanshu
    Ojha, Somanath
    Dakre, Vinayak Sanjay
    PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART L-JOURNAL OF MATERIALS-DESIGN AND APPLICATIONS, 2023, 237 (06) : 1347 - 1362
  • [7] A Review of Prestressed Fibre-Reinforced Polymer Matrix Composites
    Ogunleye, Raphael Olabanji
    Rusnakova, Sona
    POLYMERS, 2022, 14 (01)
  • [8] Polymer fibre-reinforced thermoplastics
    Kunsts Plast Eur, 7 (26-29):
  • [9] STRESSES IN FIBRE-REINFORCED MATERIALS
    ALLISON, IM
    HOLLAWAY, LC
    BRITISH JOURNAL OF APPLIED PHYSICS, 1967, 18 (07): : 979 - &
  • [10] Impact damage on fibre-reinforced polymer matrix composite - A review
    Agrawal, Sandeep
    Singh, Kalyan Kumar
    Sarkar, P. K.
    JOURNAL OF COMPOSITE MATERIALS, 2014, 48 (03) : 317 - 332