COMPARATIVE STUDIES ON MICROSTRUCTURE AND TOUGHNESS OF 9 % Ni STEEL JOINTS WELDED BY SMAW AND GTAW

被引：0
|
作者：
Zhu, Haiyang [1 ,2 ]
Yang, Xuebing [3 ]
Liu, Kun [1 ]
Wang, Xiaoyong [4 ]
Du, Yuhang [1 ]
Zou, Jiasheng [1 ]
机构：
[1] Jiangsu Univ Sci & Technol, Sch Mat Sci & Engn, Zhenjiang, Peoples R China
[2] Jiangsu Univ Sci & Technol, Suzhou Inst Technol, Sch Met Engn, Suzhou, Peoples R China
[3] Zhenjiang Zhongchuan Hitachi Zosen Machinery Co Lt, Zhenjiang, Peoples R China
[4] Jiangsu Univ Sci & Technol, Sch Met Engn, Zhangjiagang, Peoples R China
来源：
MATERIALI IN TEHNOLOGIJE | 2024年 / 58卷 / 04期
基金：
中国国家自然科学基金; 中国博士后科学基金;
关键词：
9 % Ni steel; SMAW; GTAW; microstructure; impact toughness; CRYOGENIC FRACTURE-TOUGHNESS; HEAT-AFFECTED ZONES; 9-PERCENT-NI STEEL; MECHANICAL-PROPERTIES; LASER;
D O I：
10.17222/mit.2024.109
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
The microstructure and impact toughness of 9 % Ni steel joints welded by shielded metal arc welding (SMAW) and gas tungsten arc welding (GTAW) were investigated. The two kinds of weld metal were mainly composed of cellular dendrites and a granular precipitated phase. The grains and cellular dendrites of the GTAW weld metal were smaller than those of the SMAW weld metal. The precipitates in the SMAW weld metal were stripe-shaped while those in the GTAW weld metal were rod-shaped; the number of precipitates in the GTAW weld metal was lower than in the SMAW weld metal. The low-temperature impact toughness of the GTAW weld metal was better than that of the SMAW weld melt.
引用
收藏
页码：477 / 484
页数：8
相关论文
共 50 条
  • [31] Paper Review of“Fatigue life prediction for 9%Ni steel butt welded joints”
    Shiratsuchi T.
    Yosetsu Gakkai Shi/Journal of the Japan Welding Society, 2021, 90 (05): : 359
  • [32] Microstructure and mechanical properties of GTAW welded joints of AA6105 aluminum alloy
    Dorta-Almenara, Minerva
    Cristina Capace, Maria
    REVISTA FACULTAD DE INGENIERIA, UNIVERSIDAD PEDAGOGICA Y TECNOLOGICA DE COLOMBIA, 2016, 25 (43): : 7 - 19
  • [33] Investigation on microstructure evolution, mechanical properties and corrosion resistance of dual phase stainless steel joints welded by GTAW and SAW methods
    Chu, Qiaoling
    Yang, Dan
    Chang, Zhe
    Cao, Kai
    Xie, Weiwei
    Liu, Guanhong
    Yan, Fuxue
    INTERNATIONAL JOURNAL OF PRESSURE VESSELS AND PIPING, 2024, 209
  • [34] Interpass temperature influence on the microstructure, impact toughness and fatigue crack propagation in ASTM A743-CA6NM GTAW welded joints
    de Gouveia, Ruimar Rubens
    Marenda Pukasiewicz, Anderson Geraldo
    Capra, Andre Ricardo
    Henke, Sergio Luiz
    Okimoto, Paulo Cesar
    SOLDAGEM & INSPECAO, 2013, 18 (02): : 127 - 136
  • [35] Mechanical properties and microstructure of SMAW welded and thermically treated HSLA-80 steel
    Jorge, Leandro de Jesus
    Candido, Veronica Scarpini
    Rios da Silva, Alisson Clay
    Garcia Filho, Fabio da Costa
    Pereira, Artur Camposo
    da Luz, Fernanda Santos
    Monteiro, Sergio Neves
    JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T, 2018, 7 (04): : 598 - 605
  • [36] Microstructure and Fracture Toughness of Fe-Nb Dissimilar Welded Joints
    Chu, Qiaoling
    Zhang, Lin
    Xia, Tuo
    Cheng, Peng
    Zheng, Jianming
    Zhang, Min
    Li, Jihong
    Yan, Fuxue
    Yan, Cheng
    METALS, 2021, 11 (01) : 1 - 9
  • [37] A comparative study on the effect of GTAW processes on the microstructure and mechanical properties of P91 steel weld joints
    Arivazhagan, B.
    Vasudevan, M.
    JOURNAL OF MANUFACTURING PROCESSES, 2014, 16 (02) : 305 - 311
  • [38] Microstructure Characterization of Single and Multipass 13Cr4Ni Steel Welded Joints
    Mokhtabad Amrei M.
    Verreman Y.
    Bridier F.
    Thibault D.
    Bocher P.
    Metallography, Microstructure, and Analysis, 2015, 4 (3) : 207 - 218
  • [39] Investigation of microstructure and fracture toughness of Fe-Zr welded joints
    Chu, Qiaoling
    Zhang, Min
    Li, Jihong
    Yan, Fuxue
    Yan, Cheng
    MATERIALS LETTERS, 2018, 231 : 134 - 136
  • [40] Aging constants for efficient fracture toughness prediction of thermally aged GTAW/SMAW of 316L stainless steel
    Kim, Young-Joon
    Youn, Gyo-Geun
    Hwang, Jin-Ha
    Kim, Yun-Jae
    Miura, Yasufumi
    INTERNATIONAL JOURNAL OF PRESSURE VESSELS AND PIPING, 2022, 197
12345