Influence of Laser Scanning Speed on Wear and Corrosion Resistance of Aluminum-Nickel Coating on Magnesium Alloy

被引：0
|
作者：
Gao, Yali [1 ]
Jiang, Shan [1 ]
Lu, Pengyong [1 ]
Bai, Sicheng [1 ]
Zhang, Dongdong [1 ]
Jie, Meng [2 ]
机构：
[1] Northeast Elect Power Univ, Dept Mech Engn, 169 Changchun Rd, Jilin 132012, Peoples R China
[2] Jilin Inst Chem Technol, Sch Mech Elect Engn, Jilin 132022, Peoples R China
来源：
PROCESSES | 2024年 / 12卷 / 08期
关键词：
laser cladding; Mg alloy; Al-Ni coating; wear resistance; corrosion resistance; SURFACE-LAYERS; BEHAVIOR; MICROSTRUCTURE; CLAD; AZ80;
D O I：
10.3390/pr12081689
中图分类号：
TQ [化学工业];
学科分类号：
0817 ;
摘要：
To improve the wear and corrosion resistance, Al-Ni coating was prepared on Mg alloy by laser cladding, and the influence of the laser scanning speed on the microstructure, wear and corrosion resistance of the coatings was systematically analyzed. The results showed that the coatings with different scanning speeds were composed of Al3Ni2, Mg17Al12 and Mg2Al3 phases. The coatings presented fine needle-like grains. Under different scanning speeds, the microhardness of the coatings was 3.3-4.8 times that of the substrate, and the wear volume of the coatings was decreased by 40.08-51.38%. The coating with a laser scanning speed of 600 mm/min had the highest hardness, the best wear and corrosion resistance.
引用
收藏
页数：15
相关论文
共 50 条
  • [1] Influence of laser scanning speed on the microstructure and wear resistance properties of Inconel 718 coating
    Du, Fengming
    Liu, Shanshan
    Mi, Zetian
    Zhang, Guogang
    Shen, Yan
    Liu, Yu
    JOURNAL OF MATERIALS SCIENCE, 2024, 59 (39) : 18651 - 18661
  • [2] Wear behavior and corrosion resistance of NiCrAl/TiC composite coating on aluminum alloy by laser cladding
    Liu, Hong-Xi (piiiliuhx@sina.com), 1600, Central South University of Technology (24):
  • [3] Study on the corrosion resistance and the wear resistance of electroless nickel plating of magnesium alloy
    Li, GL
    Bian, FG
    Liu, JH
    Liu, GS
    Liu, JJ
    Wang, KL
    CONTRIBUTIONS OF SURFACE ENGINEERING TO MODERN MANUFACTURING AND REMANUFACTURING, 2002, : 210 - 213
  • [4] Study on wear resistance and corrosion resistance of laser cladding nickel based alloy
    2001, Science Press (26):
  • [5] Influence of laser scanning speed on corrosion resistance and hardness properties of Fe-Mn-Si-Cr-Ni-Co alloy coating
    Fu, Fuxing
    Cheng, Hao
    Feng, Jianshe
    Chang, Genrong
    Liu, Mingxia
    Meng, Yu
    Cao, Xinwei
    INTEGRATED FERROELECTRICS, 2019, 198 (01) : 109 - 115
  • [6] Effect of laser surface melting on corrosion and wear resistance of a commercial magnesium alloy
    Majumdar, JD
    Galun, R
    Mordike, BL
    Manna, I
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2003, 361 (1-2): : 119 - 129
  • [7] Wear and Corrosion Resistance of Laser Cladding CoCrFeNiSix High Entropy Alloy Coating
    Zнang, Zejiang
    Li, Xinmei
    Cailiao Yanjiu Xuebao/Chinese Journal of Materials Research, 2024, 38 (10): : 741 - 750
  • [8] Corrosion and wear resistance of electroless nickel on magnesium alloys
    Shahin, GE
    MAGNESIUM TECHNOLOGY 2002, 2002, : 263 - 267
  • [9] Improved corrosion resistance of magnesium alloy with a surface aluminum coating electrodeposited in ionic liquid
    Chang, Jeng-Kuei
    Chen, Su-Yau
    Tsaia, Wen-Ta
    Deng, Ming-Jay
    Sun, I. -Wen
    JOURNAL OF THE ELECTROCHEMICAL SOCIETY, 2008, 155 (03) : C112 - C116
  • [10] Influence of Laser Scanning Speed on Structure Evolution and Performance of Melted Magnesium Alloy
    Pang Ming
    Fu Yixuan
    LASER & OPTOELECTRONICS PROGRESS, 2020, 57 (15)
12345