A Parametric Study on the Flexural Capacity of Cold-Formed Steel Stacked Built-up Sections

被引：0

作者：

Rezaeian, Hooman ^{[1
]}

Andarini, Rhonita ^{[2
]}

Bock, Marina ^{[3
]}

Yekrangnia, Mohammad ^{[4
]}

机构：

[1] Howick Ltd, Auckland, New Zealand

[2] Univ Auckland, Dept Civil & Environm Engn, Auckland, New Zealand

[3] Aston Univ, Dept Civil Engn, Birmingham B4 7ET, England

[4] Shahid Rajaee Teacher Training Univ, Dept Civil Engn, Tehran, Iran

来源：

INTERNATIONAL JOURNAL OF STEEL STRUCTURES | 2024年 / 24卷 / 05期

关键词：

Cold-formed steel; Stacked built-up section; Flexural capacity; Direct strength method; Parametric study; BEHAVIOR; CHANNELS; DESIGN; BEAM;

D O I：

10.1007/s13296-024-00895-8

中图分类号：

TU [建筑科学];

学科分类号：

0813 ;

摘要：

This paper presents an exploratory parametric study on the flexural capacity of an innovative cold-formed steel (CFS) stacked built-up beam section. The built-up section consists of lipped channel sections mounting vertically and screwed together through their lips and webs. Using the Direct Strength Method (DSM), a parametric study of this section is presented. The accuracy of this method is proven by comparing the results of the experiments with the modelling. Different configurations are studied, including sections compromising two, three, four and five channel sections, with thicknesses ranging from 1 to 3 mm. Four different steel grades are considered. The open flange of the built-up sections is covered by a CFS steel sheet cap to make a closed box beam. The effect of different thicknesses of the cap on the flexural capacity is also studied. The impact of the section configuration and thickness is understood to be more pronounced on the flexural capacity.

引用

页码：1142 / 1153

页数：12

共 50 条

[21] Computational modelling of built-up cold-formed steel columns and parametric studies
Abbasi, Mandana
Rasmussen, Kim J. R.
Khezri, Mani
Schafer, Benjamin W.
THIN-WALLED STRUCTURES, 2023, 191
[22] Flexural Strength of cold-formed steel built-up composite beams with rectangular compression flanges
Dar, M. Adil
Subramanian, N.
Dar, Dawood A.
Dar, A. R.
Anbarasu, M.
Lim, James B. P.
Mahjoubi, Soroush
STEEL AND COMPOSITE STRUCTURES, 2020, 34 (02) : 171 - 188
[23] Cold-formed steel built-up closed sections with intermediate stiffeners
Young, Ben
Chen, Ju
PROCEEDINGS OF THE 9TH INTERNATIONAL CONFERENCE ON STEEL, SPACE & COMPOSITE STRUCTURES, 2007, : 43 - +
[24] Numerical investigation of the flexural-torsional behaviour of built-up cold-formed steel beams
Ma, Di
Rasmussen, Kim J. R.
Zhang, Hao
THIN-WALLED STRUCTURES, 2025, 212
[25] Cold-formed ferritic stainless steel closed built-up beams: Flexural behaviour and numerical parametric study
Karthik, C.
Anbarasu, M.
THIN-WALLED STRUCTURES, 2021, 164
[26] The mechanics of built-up cold-formed steel members
Rasmussen, Kim J. R.
Khezri, Mani
Schafer, Benjamin W.
Zhang, Hao
THIN-WALLED STRUCTURES, 2020, 154 (154)
[27] Behavior of cold-formed steel built-up I-sections
Stone, TA
LaBoube, RA
THIN-WALLED STRUCTURES, 2005, 43 (12) : 1805 - 1817
[28] Axial load capacity of cold-formed steel built-up stub columns
Mohamed Ghannam
International Journal of Steel Structures, 2017, 17 : 1273 - 1283
[29] Flexural design of cold-formed steel built-up sections failing by local buckling: Development of generalised direct strength method
Maizi, Salah-Eddine
Hadidane, Yazid
Dar, Mohammad Adil
ENGINEERING STRUCTURES, 2024, 308
[30] Experimental and numerical investigations on the axial capacity of cold-formed steel built-up box sections
Roy, Krishanu
Ting, Tina Chui Huon
Lau, Hieng Ho
Lim, James B. P.
JOURNAL OF CONSTRUCTIONAL STEEL RESEARCH, 2019, 160 : 411 - 427

← 1 2 3 4 5 →