Construction of an Arrhenius constitutive model for Mg-Y-Nd-Zr-Gd rare earth magnesium alloy based on the Zener-Hollomon parameter and objective evaluation of its accuracy in the twinning-rich intervals

被引:8
作者
Han, Luyi [1 ]
Zhu, Xiangjian [1 ]
Wei, Dejin [1 ]
Yu, Yanan [1 ]
Wang, Guangchun [1 ]
机构
[1] Shandong Univ, Key Lab Liquid Solid Struct Evolut & Proc Mat, Minist Educ, Jinan 250061, Shandong, Peoples R China
关键词
magnesium alloy; Hot deformation; Zener-Hollomon parameters; Arrhenius constitutive model; Dislocation; Twinning; HOT DEFORMATION; DYNAMIC RECRYSTALLIZATION; MECHANICAL-PROPERTIES; TEXTURE EVOLUTION; VARIANT SELECTION; PROCESSING MAPS; FLOW BEHAVIOR; STRAIN-RATE; MICROSTRUCTURE; DUCTILITY;
D O I
10.1016/j.jma.2023.01.008
中图分类号
TF [冶金工业];
学科分类号
0806 ;
摘要
According to a high-temperature compression test of rare earth magnesium alloy (WE43), a strain-compensated constitutive model of the Arrhenius equation based on Zener-Hollomon parameters was established, and the rheological behaviors were predicted. The model exhibited relatively serious prediction distortion in the low-temperature and high-strain rate parameter interval, and its accuracy was still unsatisfactory even after modification by a correction operator considering the coupling of temperature and strain rate. The microstructure characterization and statistical analysis showed that a large number of twinning occurred in the parameter intervals with prediction deviation. The occurrence of twinning complicated the local internal stress distribution by drastically changing the crystal orientation and led to significant fluctuations in the macroscopic strain-stress and hardening curves relative to the rheological processes dominated by the dislocation and softening mechanisms, making the logarithm of the strain rate and stress deviate from the linear relationship. This twinning phenomenon was greatly influenced by the temperature and strain rate. Herein, the influence mechanism on twinning behavior was analyzed from the perspective of the interaction of dislocation and twinning. (c) 2023 Chongqing University. Publishing services provided by Elsevier B.V. on behalf of KeAi Communications Co. Ltd. This is an open access article under the CC BY-NC-ND license ( http://creativecommons.org/licenses/by-nc-nd/4.0/ ) Peer review under responsibility of Chongqing University
引用
收藏
页码:2890 / 2908
页数:19
相关论文
共 63 条
  • [1] A comparative study on the capability of Johnson-Cook and Arrhenius-type constitutive equations to describe the flow behavior of Mg-6A1-1Zn alloy
    Abbasi-Bani, A.
    Zarei-Hanzaki, A.
    Pishbin, M. H.
    Haghdadi, N.
    [J]. MECHANICS OF MATERIALS, 2014, 71 : 52 - 61
  • [2] In situ neutron diffraction and polycrystal plasticity modeling of a Mg-Y-Nd-Zr alloy: Effects of precipitation on individual deformation mechanisms
    Agnew, S. R.
    Mulay, R. P.
    Polesak, F. J., III
    Calhoun, C. A.
    Bhattacharyya, J. J.
    Clausen, B.
    [J]. ACTA MATERIALIA, 2013, 61 (10) : 3769 - 3780
  • [3] Application of texture simulation to understanding mechanical behavior of Mg and solid solution alloys containing Li or Y
    Agnew, SR
    Yoo, MH
    Tomé, CN
    [J]. ACTA MATERIALIA, 2001, 49 (20) : 4277 - 4289
  • [4] Deformation twin interactions with grain boundary particles in multi-phase magnesium alloys
    Anthony, B.
    Leu, B.
    Beyerlein, I. J.
    Miller, V. M.
    [J]. ACTA MATERIALIA, 2021, 219
  • [5] Barnett M.R., 2001, Journal of Light Metals, V1, P167, DOI DOI 10.1016/S1471-5317(01)00010-4
  • [6] A Taylor model based description of the proof stress of magnesium AZ31 during hot working
    Barnett, MR
    [J]. METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 2003, 34A (09): : 1799 - 1806
  • [7] Stacking-fault mediated plasticity and strengthening in lean, rare-earth free magnesium alloys
    Basu, I
    Chen, M.
    Wheeler, J.
    Schaeublin, R. E.
    Loeffler, J. F.
    [J]. ACTA MATERIALIA, 2021, 211
  • [8] Statistical analyses of deformation twinning in magnesium
    Beyerlein, I. J.
    Capolungo, L.
    Marshall, P. E.
    McCabe, R. J.
    Tome, C. N.
    [J]. PHILOSOPHICAL MAGAZINE, 2010, 90 (16) : 2161 - 2190
  • [9] Flow stress prediction using hyperbolic-sine Arrhenius constants optimised by simple generalised reduced gradient refinement
    Bodunrin, Michael Oluwatosin
    [J]. JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T, 2020, 9 (02): : 2376 - 2386
  • [10] Callister W.D., 2000, [No title captured], Patent No. 471660817