Enhanced impact resistance of RC beams using various types of high-performance fiber-reinforced cementitious composites

This study investigates the impact resistance of reinforced concrete (RC) beams using various types of highperformance fiber-reinforced cementitious composites (HPFRCCs). A total of ten large-sized RC beams were fabricated and tested under static and impact loading conditions. Four different types of HPFRCCs with 2% by volume of steel, polyvinyl alcohol (PVA), and polyethylene (PE) fibers were considered. Ultra-high-performance fiber-reinforced concrete (UHPFRC) based on steel fibers demonstrated superior compressive and tensile strengths, while high-performance strain-hardening cementitious composite (HP-SHCC) based on PE fibers exhibited the highest strain and energy absorption capacities. The steel-bar reinforced (R-) UHPFRC and HPSHCC beams showed superior flexural load capacity compared to reinforced normal strength concrete (R-NSC) beams. The highest ductility of 8.02 was found in the R-HP-SHCC beam, almost 5 times higher than that of the RNSC beam. By drop hammer impact with a kinetic energy of 30 kJ, the R-UHPFRC beam completely failed due to its higher reaction load and lower structural ductility, while other RC beams made of NSC and HPFRCCs withstood the identical impact load. The R-HP-SHCC beam exhibited the best impact resistance, with a 29.1% lower maximum deflection compared to the R-NSC beam, and the largest residual load capacity after the impact damages. The R-HP-SHCC beam, despite being damaged, showed no reduction in flexural stiffness, yet it demonstrated an impressive 5.4% increase in load capacity compared to the undamaged beam.