Thermal State Determination of the Heat Exchanger in the Three-Dimensional Setting

被引：0

作者：

Gakal, Pavlo ^{[1
]}

Tretiak, Iryna ^{[1
]}

Arefieva, Maria ^{[1
]}

Nazarenko, Viacheslav ^{[1
]}

机构：

[1] Natl Aerosp Univ, Kharkov Aviat Inst, UA-61070 Kharkov, Ukraine

来源：

INTEGRATED COMPUTER TECHNOLOGIES IN MECHANICAL ENGINEERING-2023, VOL 1, ICTM 2023 | 2024年 / 1008卷

关键词：

Turbogenerator; Cooling System; Heat Exchanger; Gas Cooler; Three-Dimensional Calculation; Thermal State;

D O I：

10.1007/978-3-031-61415-6_28

中图分类号：

TH [机械、仪表工业];

学科分类号：

0802 ;

摘要：

The presented manuscript substantiates the need to calculate the cooling system of modern Turbogenerators using the method of mathematical modeling in the three-dimensional setting. The general formulation of the problem for the calculation of the heat exchanger was carried out, the main initial parameters were determined. The problem of clogging of gas cooling pipes is considered in detail. The influence of this clogging at different percentages of the pipes obstruction on the distribution of cooling gas through them was determined. The operation principle of the cooling system of the 220 MW Turbogenerator is considered. The calculation of the gas coolers in the three-dimensional setting was performed, taking into account the influence of the thermal state of the entire generator structure. The calculation results comparison of the Turbogenerator coolers with the data of experimental studies was also carried out. The combination of the analytical method of calculation with the solution by the mathematical modeling in the three-dimensional formulation by the CFD method.

引用

页码：327 / 336

页数：10

共 16 条

[1]

Akin J, 2009, Finite Element Analysis Concepts via SolidWorks, P303

[2]

[Anonymous], 2022, IEC 60034-1:2022

[3]

Gerling D., 2015, Electrical Machines. Mathematical Engineering, V4, DOI [10.1007/978-3-642-17584-82, DOI 10.1007/978-3-642-17584-82]

[4] Numerical analysis of end part temperature in the turbogenerator end region with magnetic shield structure under the different operation conditions [J].

Han, Jichao ;

Zheng, Ping ;

Sun, Yutian ;

Lv, Yanling ;

Tao, Dajun ;

Ge, Baojun ;

Li, Weili .

INTERNATIONAL JOURNAL OF THERMAL SCIENCES, 2018, 132 :267-274

[5]

Ilyin A.V., 2014, Bull. Pskov Univ. Ser. Econ. Tech. Sci., V2, P208

[6]

Kobzar K.A., 2015, Newsletter of NTU "KhPI": collection of scientific works. Ser.: Energy and Heat-Technical Processes and Installation. Kharkiv, NTU"KhPI, V15, P112

[7]

online.budstandart, 2022, International Standard: DSTU EN IEC 60034-33:2022 Electric rotating machines. Part 33. Synchronous hydrogenerators, including motor generators. Special requirements

[8] A new efficient numerical method for contact mechanics of rough surfaces [J].

Putignano, C. ;

Afferrante, L. ;

Carbone, G. ;

Demelio, G. .

INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES, 2012, 49 (02) :338-343

[9]

Say M.G., 1976, AlternatingCurrent Machines, V4th, P543

[10]

STONE GC, 1990, CONFERENCE RECORD OF THE 1990 IEEE INTERNATIONAL SYMPOSIUM ON ELECTRICAL INSULATION, P356, DOI 10.1109/ELINSL.1990.109772

← 1 2 →