Time-dependent behaviour of 3D printed fibre-reinforced limestone calcined clay cement concrete under sustained loadings

The evolution of 3D-printed concrete (3DPC) structures has made remarkable impacts in the construction industry and academia for prospective engineering practice globally. This is due to promising outcomes of various investigations on its construction coupled with several advantages it offers over conventional cast concrete. However, the time-dependent deformation of 3DPC under sustained loading is still unknown and requires extensive research. Quasi-static studies have also shown that creep could be of great concern due to its production technique involving layer stacking, which eventually leads to weak interlayer bond strength. This paper experimentally investigates the time-dependent behaviour of fibre-reinforced printed concrete (FRPC) containing limestone calcined clay cement (LC3) under sustained tensile and flexural loadings. The experimental tests conducted on LC3-FRPC specimens in two orthogonal directions were individual creep and shrinkage to determine other parameters associated with creep responses, including creep fracture. The specimens for tensile and flexural creep were subjected to sustained stresses of 40, 60 and 80 % of the tensile and 40 % flexural strength results obtained from quasi-static tests. The quantified creep is compared in terms of the difference in stress levels, as the results revealed that none of the specimens fractured under sustained loadings. Instead, higher direct tensile strengths were recorded for the creep specimens after 225 days loaded at different stress levels. Then, it is postulated that direct tensile tests on similar LC3-FRPC specimens without creep loading may confirm that the monotonic stress-strain response at the age at which the tests are terminated forms an envelope for creep fracture.