Preparation and Properties of Waterborne Polyurethane and SBS Composite-Modified Emulsified Asphalt

被引:2
作者
Chen, Ruiqi [1 ]
Xu, Wen [1 ]
Chen, Yixing [1 ]
机构
[1] Wuhan Univ Technol, Sch Transportat & Logist Engn, Wuhan 430063, Peoples R China
来源
APPLIED SCIENCES-BASEL | 2024年 / 14卷 / 16期
关键词
modified emulsified asphalt; waterborne polyurethane; modifier; road performance; ACRYLIC ACID COPOLYMER; WARM-MIX ASPHALT; PERMANENT DEFORMATION; PARTICLE-SIZE; PERFORMANCE; BINDER; RESISTANCE; EMULSIONS; ADHESION; HOT;
D O I
10.3390/app14167288
中图分类号
O6 [化学];
学科分类号
0703 ;
摘要
To address the issue of insufficient durability of traditional modified emulsified asphalt in the application of cold mix and cold paving anti-skid wear layers, this study utilizes cationic waterborne polyurethane (PU+) for composite modification to enhance adhesion and performance across a range of temperatures. Initially, composite-modified emulsified asphalt samples were prepared with varying dosages of PU+ according to a gradient method. Routine performance tests were conducted on the evaporated residues for analysis. Advanced rheological tests, including temperature sweep (TS), frequency sweep (FS), linear amplitude sweep (LAS), and multi-stress creep recovery (MSCR) tests, were performed using a dynamic shear rheometer (DSR). Surface free energy (SFE) tests were conducted with a fully automated surface tension meter (STM). A comprehensive evaluation of the high-temperature rheological properties, fatigue properties, adhesion properties, and water damage resistance of the modified emulsified asphalt residues was carried out. Chemical changes before and after modification were characterized using Fourier transform infrared spectroscopy (FTIR), and the distribution of polymers in the evaporated residue was observed using fluorescence microscopy (FM). The results demonstrated that cationic waterborne polyurethane significantly enhanced the fatigue and adhesion properties of SBS-modified emulsified asphalt, but it also weakened the water damage resistance of asphalt. MSCR tests revealed that the addition of cationic waterborne polyurethane might reduce the elastic recovery performance of modified asphalt, thereby weakening its resistance to rutting. Among the samples, the modified asphalt with a PU+ content of 6% exhibited good high-temperature shear resistance and elastic recovery performance, demonstrating the best anti-rutting performance.
引用
收藏
页数:25
相关论文
共 35 条
[11]   The mechanisms and mechanics of the toughening of epoxy polymers modified with silica nanoparticles [J].
Hsieh, T. H. ;
Kinloch, A. J. ;
Masania, K. ;
Taylor, A. C. ;
Sprenger, S. .
POLYMER, 2010, 51 (26) :6284-6294
[12]   Effect of tack coat dosage and temperature on the interface shear properties of asphalt layers bonded with emulsified asphalt binders [J].
Hu, Xiaodi ;
Lei, Yong ;
Wang, Hainian ;
Jiang, Pei ;
Yang, Xu ;
You, Zhanping .
CONSTRUCTION AND BUILDING MATERIALS, 2017, 141 :86-93
[13]   A review on moisture damages of hot and warm mix asphalt and related investigations [J].
Kakar, Muhammad Rafiq ;
Hamzah, Meor Othman ;
Valentin, Jan .
JOURNAL OF CLEANER PRODUCTION, 2015, 99 :39-58
[14]   Performance evaluation of waterborne epoxy resin-SBR composite modified emulsified asphalt fog seal [J].
Liu, Fuqiang ;
Zheng, Mulian ;
Liu, Xia ;
Ding, Xiaoyan ;
Wang, Fei ;
Wang, Qianqian .
CONSTRUCTION AND BUILDING MATERIALS, 2021, 301
[15]   Effect of ethylene-acrylic acid copolymer on flame retardancy and properties of LLDPE/EAA/MH composites [J].
Liu, Junjun ;
Zhang, Yong .
POLYMER DEGRADATION AND STABILITY, 2011, 96 (12) :2215-2220
[16]   Energy-saving potential of the industrial sector of Taiwan [J].
Lu, Shyi-Min ;
Lu, Ching ;
Tseng, Kuo-Tung ;
Chen, Falin ;
Chen, Chen-Liang .
RENEWABLE & SUSTAINABLE ENERGY REVIEWS, 2013, 21 :674-683
[17]   Review of mechanistic-empirical modeling of top-down cracking in asphalt pavements [J].
Luo, Xue ;
Gu, Fan ;
Ling, Meng ;
Lytton, Robert L. .
CONSTRUCTION AND BUILDING MATERIALS, 2018, 191 :1053-1070
[18]   A viscoelastic continuum damage model and its application to uniaxial behavior of asphalt concrete [J].
Park, SW ;
Kim, YR ;
Schapery, RA .
MECHANICS OF MATERIALS, 1996, 24 (04) :241-255
[19]   The anti-corrosion performance of water-borne paints in long term tests [J].
Roselli, S. N. ;
Romagnoli, R. ;
Deyda, C. .
PROGRESS IN ORGANIC COATINGS, 2017, 109 :172-178
[20]   Thermal stabilization and permanent deformation resistance of LWA/PCM-modified asphalt road surfaces [J].
Ryms, Michal ;
Denda, Hubert ;
Jaskula, Piotr .
CONSTRUCTION AND BUILDING MATERIALS, 2017, 142 :328-341