Preparation and Properties of Waterborne Polyurethane and SBS Composite-Modified Emulsified Asphalt

被引:2
作者
Chen, Ruiqi [1 ]
Xu, Wen [1 ]
Chen, Yixing [1 ]
机构
[1] Wuhan Univ Technol, Sch Transportat & Logist Engn, Wuhan 430063, Peoples R China
来源
APPLIED SCIENCES-BASEL | 2024年 / 14卷 / 16期
关键词
modified emulsified asphalt; waterborne polyurethane; modifier; road performance; ACRYLIC ACID COPOLYMER; WARM-MIX ASPHALT; PERMANENT DEFORMATION; PARTICLE-SIZE; PERFORMANCE; BINDER; RESISTANCE; EMULSIONS; ADHESION; HOT;
D O I
10.3390/app14167288
中图分类号
O6 [化学];
学科分类号
0703 ;
摘要
To address the issue of insufficient durability of traditional modified emulsified asphalt in the application of cold mix and cold paving anti-skid wear layers, this study utilizes cationic waterborne polyurethane (PU+) for composite modification to enhance adhesion and performance across a range of temperatures. Initially, composite-modified emulsified asphalt samples were prepared with varying dosages of PU+ according to a gradient method. Routine performance tests were conducted on the evaporated residues for analysis. Advanced rheological tests, including temperature sweep (TS), frequency sweep (FS), linear amplitude sweep (LAS), and multi-stress creep recovery (MSCR) tests, were performed using a dynamic shear rheometer (DSR). Surface free energy (SFE) tests were conducted with a fully automated surface tension meter (STM). A comprehensive evaluation of the high-temperature rheological properties, fatigue properties, adhesion properties, and water damage resistance of the modified emulsified asphalt residues was carried out. Chemical changes before and after modification were characterized using Fourier transform infrared spectroscopy (FTIR), and the distribution of polymers in the evaporated residue was observed using fluorescence microscopy (FM). The results demonstrated that cationic waterborne polyurethane significantly enhanced the fatigue and adhesion properties of SBS-modified emulsified asphalt, but it also weakened the water damage resistance of asphalt. MSCR tests revealed that the addition of cationic waterborne polyurethane might reduce the elastic recovery performance of modified asphalt, thereby weakening its resistance to rutting. Among the samples, the modified asphalt with a PU+ content of 6% exhibited good high-temperature shear resistance and elastic recovery performance, demonstrating the best anti-rutting performance.
引用
收藏
页数:25
相关论文
共 35 条
[1]   A study on fatigue modeling of hot mix asphalt mixtures based on the viscoelastic continuum damage properties of asphalt binder [J].
Ameri, Mahmoud ;
Nowbakht, Shams ;
Molayem, Mohammad ;
Mirabimoghaddam, Mohammad H. .
CONSTRUCTION AND BUILDING MATERIALS, 2016, 106 :243-252
[2]   Morphology, rheology, and physical properties of polymer-modified asphalt binders [J].
Behnood, Ali ;
Gharehveran, Mahsa Modiri .
EUROPEAN POLYMER JOURNAL, 2019, 112 :766-791
[3]   Characterization of aggregate surface energy using the universal sorption device [J].
Bhasin, Amit ;
Little, Dallas N. .
JOURNAL OF MATERIALS IN CIVIL ENGINEERING, 2007, 19 (08) :634-641
[4]   Application of Microcalorimeter to Characterize Adhesion between Asphalt Binders and Aggregates [J].
Bhasin, Amit ;
Little, Dallas N. .
JOURNAL OF MATERIALS IN CIVIL ENGINEERING, 2009, 21 (06) :235-243
[5]   The development of polyurethane modified bitumen emulsions for cold mix applications [J].
Carrera, V. ;
Cuadri, A. A. ;
Garcia-Morales, M. ;
Partal, P. .
MATERIALS AND STRUCTURES, 2015, 48 (10) :3407-3414
[6]   Research on the adhesion mechanism and compatibility of acrylate composite polyurethane binder - aggregate based on surface free energy theory [J].
Duan, Shaochan ;
Cui, Jingxian ;
Hu, Jianying ;
Han, Tao ;
Chen, Yan ;
Wang, Hongyu ;
Ma, Tao .
CONSTRUCTION AND BUILDING MATERIALS, 2024, 438
[7]   Precipitation of anionic emulsifier with ordinary Portland cement [J].
Fang, Xing ;
Winnefeld, Frank ;
Lura, Pietro .
JOURNAL OF COLLOID AND INTERFACE SCIENCE, 2016, 479 :98-105
[8]   Composition optimisation and performance evaluation of waterborne epoxy resin emulsified asphalt tack coat binder for pavement [J].
Fu, Hao ;
Wang, Chaohui ;
Niu, Liangliang ;
Yang, Guolin ;
Liu, Luqing .
INTERNATIONAL JOURNAL OF PAVEMENT ENGINEERING, 2022, 23 (11) :4034-4048
[9]   Binder-aggregate adhesion and resistance to permanent deformation of bitumen-emulsion-stabilized materials made with construction and demolition waste aggregates [J].
Gomez-Meijide, B. ;
Perez, I. .
JOURNAL OF CLEANER PRODUCTION, 2016, 129 :125-133
[10]   Compactability and thermal sensitivity of cement-bitumen-treated materials [J].
Grilli, Andrea ;
Graziani, Andrea ;
Bocci, Maurizio .
ROAD MATERIALS AND PAVEMENT DESIGN, 2012, 13 (04) :599-617