Influence of magnesite/limestone addition on the hydration characteristics of ternary slag cement systems

To explore the potential of magnesite adopted as supplementary cementitious material (SCM) in cement industry, the authors of this paper investigated the hydration characteristics of ternary slag cement mixtures containing magnesite or limestone. All cement pastes were formulated with a water-to-binder ratio of 0.4, and a total of 50 % substitution level was applied across the blends, with varying slag and magnesite/limestone contents. Experimental results confirmed that adding limestone to slag cement can promote the hydration of cement clinker through the nucleation effect, while not for magnesite addition. As the substitution ratio of magnesite increased, there was a notable increase in both the critical pore diameter and cumulative pore volume, leading to a continuous decrease in the compressive strength of cement pastes. Compared to limestone-containing blends, the incorporation of magnesite was more beneficial to the compressive strength at 7 and 28 days. Additionally, limestone facilitated the precipitation of hemi- and mono-carboaluminate, whereas no hemicarbonate was observed in mixtures containing magnesite. The addition of magnesite promoted the formation of hydrotalcitelike phase, and the quantitative analysis revealed that the dissolution of magnesite primarily occurred in the first 7 days. The authors believed that the results obtained in this paper proposed new perspectives on utilizing magnesite as SCM in cement industry.