Carbon Fiber-Reinforced PLA Composite for Fused Deposition Modeling 3D Printing

被引：4
作者：
Wang, Andong [1 ]
Tang, Xinting [1 ]
Zeng, Yongxian [1 ]
Zou, Lei [1 ]
Bai, Fan [1 ]
Chen, Caifeng [1 ]
机构：
[1] Jiangsu Univ, Sch Mat Sci & Engn, Zhenjiang 212013, Peoples R China
来源：
POLYMERS | 2024年 / 16卷 / 15期
基金：
中国国家自然科学基金;
关键词：
polylactic acid; enhanced modification; mechanical properties; thermal stability; process parameters; PROCESS PARAMETERS; PERFORMANCE;
D O I：
10.3390/polym16152135
中图分类号：
O63 [高分子化学（高聚物）];
学科分类号：
070305 ; 080501 ; 081704 ;
摘要：
Polylactic acid (PLA) composite serve as widely used filaments in fused deposition modeling (FDM) 3D printing. This study investigates the enhancement of PLA composite's comprehensive mechanical properties and thermal stability through the incorporation of carbon fiber (CF). The influence of FDM process parameters on the mechanical properties of PLA composite is also analyzed. Results show that adding 5 wt.% CF significantly enhances the stiffness and comprehensive mechanical properties of PLA composite. The order of printing factors affecting the tensile strength of the PLA composite product is as follows: printing layer thickness, bottom plate temperature, printing speed, and nozzle temperature. Finally, optimal tensile strength is achieved under specific conditions: 0.1 mm layer thickness, 60 degrees C bottom plate temperature, 40 mm/s printing speed, and 215 degrees C nozzle temperature.
引用
收藏
页数：11
相关论文
共 50 条
  • [31] Research on a Fiber Corner Compensation Algorithm in a 3D Printing Layer of Continuous Fiber-Reinforced Composite Materials
    Liu, Jiang
    Kang, Yuzhu
    Ma, Chenyu
    Wang, Yesong
    APPLIED SCIENCES-BASEL, 2022, 12 (13):
  • [32] Experimental evaluation of variable thickness 3D printing of continuous carbon fiber-reinforced composites
    Kumekawa, Naoya
    Mori, Yuto
    Tanaka, Haruya
    Matsuzaki, Ryosuke
    COMPOSITE STRUCTURES, 2022, 288
  • [33] Determining process-window for manufacturing of continuous carbon fiber-reinforced composite Using 3D-printing
    Mosleh, Nastaran
    Rezadoust, Amir M.
    Dariushi, Soheil
    MATERIALS AND MANUFACTURING PROCESSES, 2021, 36 (04) : 409 - 418
  • [34] Development and Mechanical Characterization of Short Curaua Fiber-Reinforced PLA Composites Made via Fused Deposition Modeling
    Cavalcanti, Daniel K. K.
    Neto, Jorge S. S.
    de Queiroz, Henrique F. M.
    Wu, Yiyun
    Neto, Victor F. S.
    Banea, Mariana D.
    POLYMERS, 2022, 14 (22)
  • [35] Bionic Design and 3D Printing of Continuous Carbon Fiber-Reinforced Polylactic Acid Composite with Barbicel Structure of Eagle-Owl Feather
    Liang, Yunhong
    Liu, Chang
    Zhao, Qian
    Lin, Zhaohua
    Han, Zhiwu
    Ren, Luquan
    MATERIALS, 2021, 14 (13)
  • [36] Effect of Infill Ratio on the Tensile and Flexural Properties of Unreinforced and Carbon Fiber-Reinforced Polylactic Acid Manufactured by Fused Deposition Modeling
    Oteyaka, Mustafa Ozhur
    Aybar, Kerem
    Oteyaka, Hasan Chandra
    JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE, 2021, 30 (07) : 5203 - 5215
  • [37] Enhancing 3D Printing Copper-PLA Composite Fabrication via Fused Deposition Modeling through Statistical Process Parameter Study
    Moradi, Mahmoud
    Mehrabi, Omid
    Rasoul, Fakhir A.
    Mattie, Anas Abid
    Schaber, Friedemann
    Khandan, Rasoul
    MICROMACHINES, 2024, 15 (09)
  • [38] THERMOPLASTICS 3D PRINTING USING FUSED DEPOSITION MODELING ON FABRICS
    Blais, Maxwell
    Tomlinson, Scott
    Khoda, Bashir
    PROCEEDINGS OF ASME 2021 INTERNATIONAL MECHANICAL ENGINEERING CONGRESS AND EXPOSITION (IMECE2021), VOL 3, 2021,
  • [39] Short carbon fiber-reinforced PLA composites: influence of 3D-printing parameters on the mechanical and structural properties
    Alkabbanie, Rasha
    Aktas, Bulent
    Demircan, Gokhan
    Yalcin, Serife
    IRANIAN POLYMER JOURNAL, 2024, 33 (08) : 1065 - 1074
  • [40] Design optimization of PLA lattice in 3D printing
    Jain, R.
    Gupta, N.
    MATERIALS TODAY-PROCEEDINGS, 2022, 59 : 1577 - 1583
12345