Carbon Fiber-Reinforced PLA Composite for Fused Deposition Modeling 3D Printing

被引：4
|
作者：
Wang, Andong [1 ]
Tang, Xinting [1 ]
Zeng, Yongxian [1 ]
Zou, Lei [1 ]
Bai, Fan [1 ]
Chen, Caifeng [1 ]
机构：
[1] Jiangsu Univ, Sch Mat Sci & Engn, Zhenjiang 212013, Peoples R China
来源：
POLYMERS | 2024年 / 16卷 / 15期
基金：
中国国家自然科学基金;
关键词：
polylactic acid; enhanced modification; mechanical properties; thermal stability; process parameters; PROCESS PARAMETERS; PERFORMANCE;
D O I：
10.3390/polym16152135
中图分类号：
O63 [高分子化学（高聚物）];
学科分类号：
070305 ; 080501 ; 081704 ;
摘要：
Polylactic acid (PLA) composite serve as widely used filaments in fused deposition modeling (FDM) 3D printing. This study investigates the enhancement of PLA composite's comprehensive mechanical properties and thermal stability through the incorporation of carbon fiber (CF). The influence of FDM process parameters on the mechanical properties of PLA composite is also analyzed. Results show that adding 5 wt.% CF significantly enhances the stiffness and comprehensive mechanical properties of PLA composite. The order of printing factors affecting the tensile strength of the PLA composite product is as follows: printing layer thickness, bottom plate temperature, printing speed, and nozzle temperature. Finally, optimal tensile strength is achieved under specific conditions: 0.1 mm layer thickness, 60 degrees C bottom plate temperature, 40 mm/s printing speed, and 215 degrees C nozzle temperature.
引用
收藏
页数：11
相关论文
共 50 条
  • [21] Effect of post treatment on tensile properties of carbon reinforced PLA composite by 3D printing
    Guduru, K. K.
    Srinivasu, G.
    MATERIALS TODAY-PROCEEDINGS, 2020, 33 : 5403 - 5407
  • [22] 3D Printing: Overview of PLA Progress
    Subramaniam, S. R.
    Samykano, M.
    Selvamani, S. K.
    Ngui, W. K.
    Kadirgama, K.
    Sudhakar, K.
    Idris, M. S.
    PROCEEDINGS OF THE 3RD INTERNATIONAL CONFERENCE ON AUTOMOTIVE INNOVATION GREEN ENERGY VEHICLE (AIGEV 2018), 2019, 2059
  • [23] Recent Developments in Fused Deposition Modeling-Based 3D Printing of Polymers and Their Composites
    Rahim, Tuan Noraihan Azila Tuan
    Abdullah, Abdul Manaf
    Akil, Hazizan Md
    POLYMER REVIEWS, 2019, 59 (04) : 589 - 624
  • [24] Challenges of fused deposition modeling 3D printing in pharmaceutical applications: Where are we now?
    Parulski, Chloe
    Jennotte, Olivier
    Lechanteur, Anna
    Evrard, Brigitte
    ADVANCED DRUG DELIVERY REVIEWS, 2021, 175
  • [25] 3D-Printed Fiber-Reinforced Polymer Composites by Fused Deposition Modelling (FDM): Fiber Length and Fiber Implementation Techniques
    Ismail, Khairul Izwan
    Yap, Tze Chuen
    Ahmed, Rehan
    POLYMERS, 2022, 14 (21)
  • [26] Development of 3D printing short carbon fiber reinforced polypropylene composite filaments
    Almeshari, Bandar
    Junaedi, Harri
    Baig, Muneer
    Almajid, Abdulhakim
    JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T, 2023, 24 : 16 - 26
  • [27] Characterization and fabrication of bio-composite filaments for fused deposition modeling 3D printing
    Phengchan, P.
    Chaijaruwanich, A.
    Nakkiew, W.
    Pitjamit, S.
    INTERNATIONAL CONFERENCE ON ENGINEERING, APPLIED SCIENCES AND TECHNOLOGY 2019, 2019, 639
  • [28] A review of recently developed polymer composite materials for fused deposition modeling 3D printing
    Dewada, Surendra Singh
    Telang, Amit
    MATERIALS RESEARCH EXPRESS, 2021, 8 (12)
  • [29] Carbon nanotube as a conductive rheological modifier for carbon fiber-reinforced epoxy 3D printing inks
    Kasraie, Masoud
    Krieg, Aaron S.
    Abbott, Andrew C.
    Gawde, Akash
    Eisele, Timothy C.
    King, Julia A.
    Odegard, Gregory M.
    Baur, Jeffery W.
    Abadi, Parisa Pour Shahid Saeed
    COMPOSITES PART B-ENGINEERING, 2024, 282
  • [30] Process-dependent multiscale modeling for 3D printing of continuous fiber-reinforced composites
    Zhang, Junming
    Yang, Weidong
    Li, Yan
    ADDITIVE MANUFACTURING, 2023, 73
12345