Selection of Phase Change Material for Latent Heat Thermal Energy Storage Using a Hairpin Heat Exchanger: Numerical Study

Phase change materials (PCMs) are promising for storing thermal energy as latent heat, addressing power shortages. Growing demand for concentrated solar power systems has spurred the development of latent thermal energy storage, offering steady temperature release and compact heat exchanger designs. This study explores melting and solidification in a hairpin-type heat exchanger (HEX) using three PCMs (RT 50, RT 27, and RT 35). A 3D model of the HEX is drawn using Ansys-workbench. High-temperature fluid/low-temperature fluid (HTF/LTF) with Stefan numbers (0.44, 0.35, and 0.23) flows through the inner pipe to charge the outer pipe's PCM. The Enthalpy-porosity model is used to study the melting and solidification of various PCMs, and the results were compared. Also, individual thermophysical properties that affect the heat transfer during the melting and solidification process have been discussed. It is observed that low thermal conductivity material with high latent heat is preferred for cold climates. In this study, RT 27 excels in cold climates due to extended solidification time, while RT 50 is effective in tropical regions due to its high melting points and lower latent heat.