Mechanical behavior and energy characteristics of red sandstone with different seawater immersion heights under biaxial compression

Rock structures engineered during undersea mining are typically subjected to varying water distributions due to the motion of seawater, which considerably influences their stability. Hence, it is essential to understand the influence of seawater distribution on the mechanical behavior and energy characteristics of rocks. In this study, biaxial compression tests were conducted on red sandstone at various seawater immersion heights, and acoustic emission signals during compression were monitored. The results illustrate that the mechanical properties of the red sandstone deteriorate significantly upon seawater immersion. With an increase in seawater immersion height, the peak strength and elastic modulus of the rock specimens decreased exponentially. When the seawater immersion height was varied from 0 to 1/4 H under lateral stresses of 5, 10, 15, and 20 MPa, the peak strength decreased by 18.94%, 20.29%, 17.47%, and 14.87%, respectively, and the elastic modulus decreased by 4.6%, 8.1%, 11.7%, and 10.9%, respectively. Brittleness also decreased gradually. During compression, the acoustic emission (AE) and accumulated AE counts exhibited a stationary phenomenon, first increasing slowly and then suddenly. However, the AE counts decrease with increasing seawater immersion height. Meanwhile, with increasing seawater immersion height, the proportion of tensile cracks gradually increased and that of shear cracks gradually decreased. As the seawater immersion height increased, both the peak total input strain energy and peak total elastic strain energy decreased, whereas the peak total dissipated strain energy exhibited the opposite trend.