Analysis of the Eddy current of water heating device to convert wind energy directly into heat: Case study maldo island, South Korea

The Eddy Current of Water Heating (ECWH) system introduces a pioneering approach for converting wind energy into heat, marking a significant step in renewable energy technology. The current study focuses on refining the ECWH system by evaluating eight distinct heat generator models. Each model is selected based on its magnet configurations and pole numbers to maximize power efficiency at rotational speeds ranging from 100 to 500 rpm. This selection strategy is designed to provide a deep understanding of not only system efficiency across a spectrum of technical specifications but also the practical limitations of experimental research considerations. Energy efficiency is thoroughly analyzed for four models over a power input range of 120 to 2193 W. Wind speed data collected over a year from Maldo Island, west coast of South Korea, simulates the Weibull distribution of wind speeds and estimates total power production by employing the QBlade software. This study aims to explore the practicality of converting wind's kinetic energy directly into thermal energy through the ECWH system. Our findings indicate that the ECWH system outperforms conventional permanent magnet alternators, particularly in its ability to generate more power at lower angular velocities and wind speeds-a crucial feature for locales like Maldo Island, where typical wind speeds range from 3 to 6 m/s, considered low to moderate. With an energy efficiency exceeding 90%, generating an annual power output of 2266.3 kWh, and achieving a facility utilization rate of 10.34%, the results underscore the potential of the ECWH system as an efficient and sustainable solution for heating in areas with similar wind conditions.