Modeling and 3-D simulation of petroleum coke calcination process: investigation of the effect of main operating variables

Coke calcination is a process that involves heating green petroleum coke to purify it and eliminate volatile materials for subsequent processing. Due to the complexity of the rotary kiln used in this process, conducting experimental studies can be challenging and restricted. However, quantitative analyses based on developed models can provide a foundation for optimizing and controlling the process, which can significantly enhance the design efficiency. A three-dimensional simulation model of a rotary calcining kiln for petroleum coke was created using COMSOL Multiphysics in a steady-state mode. This model accounted for all relevant physical and chemical phenomena in the gas stream and coke bed flow, including heat transfer, combustion, and the evolution of volatile matter and coke dust. The mathematical modeling yielded distributions of temperature and mass fractions within the kiln, as well as the velocity field. The results revealed two distinct peak temperatures in the gas phase: 1,780 K near the primary air injection point and 1,605 K near the tertiary air injection points. The findings were analyzed, and the impact of key variables was explored. The simulation data indicated that for every decrease of 10-15 m/s in air flow, the gas peak temperature dropped by approximately 100 degrees. Additionally, an increase in the input oxygen concentration led to enhanced combustion, resulting in higher peak concentrations of CO2. The developed simulation model has proven to be a valuable and promising tool for the design and optimization of petroleum coke rotary kilns.