Eight element MIMO antenna for sub 6 GHz 5G cellular devices

This article introduces a wide-band MIMO antenna system with eight elements specifically designed for future handheld devices. The antenna is integrated into a 150 x 75 mm2 main board with a DGS antenna beneath it, connected to feed lines, and etched onto the ground plane. Covering two distinct 5G bands from 3 GHz to 3.6 GHz and from 3.6 GHz to 3.9 GHz, with 900 MHz impedance bandwidths, this antenna enables efficient data transmission and reception across these crucial frequency ranges. The system exhibits pattern and spatial diversity characteristics, achieving an overall efficiency of 40%-60% and a peak gain of 5.3 dBi, ensuring robust signal strength and isolation exceeding 10 dB among radiating elements. Furthermore, the antenna excels in key MIMO parameters, with an envelope correlation coefficient (ECC) below 0.19, well within the industry standard of less than 0.5, and it delivers more than 9.99 dB of diversity gain. Furthermore, Channel capacity Loss (CCL), Mean Effective Gain (MEG) and Total Active Reflection Co-efficient (TARC) across the entire operational band ensure good performance, promising enhanced diversity performance, superior data throughput, and heightened signal reliability. are The SAR analysis conducted yielded positive results within the human vicinity. The measurements obtained from the prototype matched well with simulations and through measurements obtained the proposed MIMO system can be termed as a potential candidate for future 5G Mobile Phones.