Aiming the water transport issues of anion exchange membrane fuel cells by introducing hydrophobic carbon nanotube diffusion layer

The gas diffusion layer (GDL) enhances the transport efficiency of reaction gases and facilitates the removal of accumulated liquid water, thereby improving water management in anion exchange membrane fuel cells (AEMFCs). Carbon nanotubes (CNTs) are recognized as one of the promising materials to optimize mass transport within GDLs. In this study, we successfully synthesized an abundance of CNTs on the surface of commercial gas diffusion media. The as-prepared CNT layer exhibits exceptionally high hydrophobic properties and forms a hierarchically hydrophobic structure combined with the gas diffusion media, effectively enhancing the mass transfer of the membrane electrode assembly (MEA) and reducing ohmic impedance. Under supersaturation conditions, the power density of the MEA containing CNTs reaches 1031.7 mW/cm2, 2 , significantly higher than the 760.64 mW/cm2 2 observed for the commercial GDL. Further testing demonstrates that the MEA containing CNTs exhibits a limiting current density of 2507.4 mA/cm2, 2 , which is much superior to the benchmark MEA with the commercial GDL (1591 mA/cm2). 2 ). Electrochemical impedance spectroscopy analysis reveals that the mass transfer resistance of MEAs with CNTs is lower than that of MEAs with the commercial GDL. More importantly, the phase-field modeling is performed to simulate the transport of the liquid water in the hierarchical GDL.