Investigation of the double layer structure of 1-butyl-3-methylimidazolium thiocyanate at the air-water interface using sum-frequency generation vibrational spectroscopy

The interfacial structure and adsorption behavior of 1-butyl-3-methylimidazolium thiocyanate ionic liquids (ILs) aqueous solutions were investigated using sum-frequency generation vibrational spectroscopy (SFG-VS) and surface tension measurements. Polarization-dependent measurements revealed a dramatic increase in the SFG signal for both CH and CN stretching modes with increasing ILs concentration, reaching a maximum at a mole fraction of 0.01. This concentration dependence was accompanied by a dramatic drop in surface tension. Upon further increasing the concentration, surface tension varied slightly and reached a constant value, while the SFG signal decreased significantly. Quantitative polarization analysis showed that as the bulk concentration increased, the apparent molecular orientation of the SCN- transition dipole at the interface changed from 51 degrees to 46 degrees, and the tilt angle of CH3 group of the butyl chain attached to the imidazole cationic ring changed from 18 degrees to 32 degrees. The decrease in the SFG signal can be explained by the formation of a double layer adsorption structure at the air/water interface. It was also demonstrated that the anions were adsorbed at the interface simultaneously with the cationic group, rather than by successive adsorption as proposed in a previous study. Using the Shereshefsky model, the thermodynamic Gibbs free energy of adsorption deduced from surface tension data was compared with SFG results.