INVESTIGATION OF THE EFFECT OF ELBOW PIPES OF TI6AL4V, 304 STAINLESS STEEL, AZ91 MATERIALS ON EROSION CORROSION BY FINITE ELEMENT ANALYSIS

被引:0
作者
Gok, Kadir [1 ]
Danismaz, Merdin [2 ]
Urtekin, Levent [2 ]
Ada, Hediye Deniz [3 ]
Gok, Arif [3 ]
机构
[1] Izmir Bakircay Univ, Dept Bioned Engn, Izmir, Turkiye
[2] Kirsehir Ahi Evran Univ, Dept Mech Engn, Kirsehir, Turkiye
[3] Kutahya Dumlupinar Univ, Vocat Sch Tech Sci, Dept Chem Technol, Kutahya, Turkiye
关键词
Titanium; magnesium; stainless steel; erosion corrosion; FEA; STEEL;
D O I
10.14311/AP.2024.64.0360
中图分类号
T [工业技术];
学科分类号
08 ;
摘要
Corrosion is the degradation of metals caused by chemical or electrochemical reactions with their environment. As a result of these reactions, undesirable conditions occur in the physical, chemical, mechanical and electrical properties of metals. These conditions cause parts made of metallic materials to become unusable. Erosion corrosion is one of the most common types of corrosion in fluid transfer. There are several methods for preventing erosion corrosion. First of all, some precautions should be taken to prevent wear. Intervention is very important in terms of cost, especially at the design stage. Measures such as wide angle bends, wall thickness of wear-resistant material and corrosion allowance can be taken, especially in applications where the flow direction needs to be changed. The aim of this study was to determine the effect of liquid fluid on erosion corrosion in Ti6Al4V, 304 stainless steel and MgAz91 elbow pipes by using the computer aided and finite element based AnsysWorkbench Explicit Dynamics module. For the design of the elbow pipe, SolidWorks was used for 3D studies. In the analysis of the pipe, the suitability of the pipe for the 3D model was examined. The effect of fluid rotation on the pipe walls and the effect of the pipe material on the flow along the pipe were determined. The standard k-e model based on the velocity-pressure relationship in continuous and steady flow was used for the flow calculations. The flow simulation showed that for all models the flow accumulation after rotation was more concentrated on the opposite walls of the pipe, as expected. The results obtained showed that the deformation in MgAZ91 material had the highest value at 9.14 x 10-8 mm. This situation has been interpreted to mean that it may vary depending on the flow rate automation. Designs on the old designs in the erosion structure of the liquid that occurs in the pipes with a new product design in the analysis design.
引用
收藏
页码:360 / 367
页数:8
相关论文
共 50 条
[31]   Effect of Fluoride on the Corrosion Behavior of Ti and Ti6Al4V Dental Implants Coupled With Different Superstructures [J].
Anwar, Eman M. ;
Kheiralla, Lamia S. ;
Tammam, Riham H. .
JOURNAL OF ORAL IMPLANTOLOGY, 2011, 37 (03) :309-318
[32]   Finite element investigation on shear deformation and cutting force for two types of elliptical vibration cutting Ti6Al4V alloy [J].
Zhou, Zongzheng ;
Han, Jinguo ;
Li, Shunkang ;
Feng, Zeqi ;
Han, Xinzhe ;
Liu, Xianfu ;
Liu, Yanhou .
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2025, 138 (9-10) :4823-4847
[33]   Compressive Strength Evaluation in Brazed ZrO2/Ti6Al4V Joints Using Finite Element Analysis [J].
Sharma, Ashutosh ;
Kee, Se Ho ;
Jung, Flora ;
Heo, Yongku ;
Jung, Jae Pil .
JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE, 2016, 25 (05) :1722-1728
[34]   Finite element analysis of spring back in Ti-6Al-4V alloy [J].
Wahed, M. A. ;
Gadi, V. S. R. ;
Gupta, A. K. ;
Supradeepan, K. ;
Singh, S. K. ;
Kotkunde, N. R. .
MATERIALS TODAY-PROCEEDINGS, 2019, 18 :2693-2699
[35]   Effect of axial magnetic field on cold metal transfer arc-brazing of Ti6Al4V to 304L steel [J].
Mou, Gang ;
Hua, Xueming ;
Wang, Min ;
Huang, Ye ;
Li, Fang ;
Huang, Wudong .
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 2020, 275
[36]   Finite element modelling of combined turning/burnishing effects on surface integrity of Ti6Al4V alloy [J].
Rotella, Giovanna ;
Saffioti, Maria Rosaria ;
Sanguedolce, Michela ;
Umbrello, Domenico .
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2022, 119 (1-2) :177-187
[37]   Finite element modelling of combined turning/burnishing effects on surface integrity of Ti6Al4V alloy [J].
Giovanna Rotella ;
Maria Rosaria Saffioti ;
Michela Sanguedolce ;
Domenico Umbrello .
The International Journal of Advanced Manufacturing Technology, 2022, 119 :177-187
[38]   Finite element simulation of the residual stress in Ti6Al4V titanium alloy laser welded joint [J].
Zhao, Xilong ;
Wang, Kun .
INTERNATIONAL JOURNAL OF MATERIALS RESEARCH, 2019, 110 (05) :466-475
[39]   The role of material model in the finite element simulation of high-speed machining of Ti6Al4V [J].
Gao, Chong-Yang ;
Zhang, Liang-Chi ;
Liu, Peng-Hui .
PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART C-JOURNAL OF MECHANICAL ENGINEERING SCIENCE, 2016, 230 (17) :2959-2967
[40]   Green electropolishing treatment of Ti6Al4V EBM parts: effect on morphology and corrosion resistance [J].
Acquesta, A. ;
Desiderio, F. ;
Monetta, T. .
PROGRESS IN ADDITIVE MANUFACTURING, 2025,