Study on the Dependence of the Acoustoelastic Effect in Concrete on Material Strength

The acoustoelastic technique shows considerable potential for in situ stress measurement in concrete. However, the current technology is not fully developed, and challenges primarily arise from the intricate nature of concrete, along with various factors affecting its acoustoelastic properties, such as material strength, aggregate size, porosity, temperature, and humidity. A comprehensive understanding of how these factors influence the acoustoelastic characteristics of concrete is essential for advancing acoustoelastic technology in engineering applications. This study specifically focuses on the material strength, a pivotal factor influencing the quality of concrete, and explores its correlation with the acoustoelastic coefficient (AEC). An initial theoretical investigation was conducted to establish a theoretical model between the two factors, involving two steps: (1) integrating the empirical formula correlating material strength and Young's modulus into the acoustoelastic equations for bulk waves to derive the formula connecting AECs and concrete strengths; (2) applying qualitative analysis and statistical methods to assess the monotonic properties of the formula within its defined domain. To validate the accuracy of the theoretical model, acoustoelastic tests were conducted on prismatic concrete specimens with five different strength levels under axial compressive stress. The findings revealed a consistent pattern, demonstrating that the AECs of concrete decrease with an increase in material strength under axial compressive stress. The outcomes of this study make a substantial contribution to establishing a theoretical foundation for the development of concrete stress monitoring technology based on the ultrasonic method. The safety of concrete structures is paramount. Currently, structural performance assessment relies primarily on on-site inspections and evaluations by professionals to detect visible cracks and deformations. Typically, cracks become apparent only once the damage has reached a critical level. Failure to identify deterioration processes before reaching this critical stage necessitates significant repairs to prevent premature failure of concrete structural components. If the in situ stress information of structures can be nondestructively obtained would be highly beneficial for warning the early deterioration, tracking the evolution of crack or damage, and forecasting the remaining service life of structures. Acoustoelastic techniques have demonstrated significant potential in achieving this objective. Nonetheless, concrete acoustoelastic effects are influenced by various factors, such as material strength, aggregate size, porosity, and environmental conditions, which impede further advancement of this technology. Therefore, this study investigated the dependence of concrete acoustoelastic effects on material strength. Correlation equations between concrete strength and acoustoelastic coefficients have been formulated. The application of these equations in practice can mitigate the impact of material strength on acoustoelastic measurements. This research contributes to advancing the engineering applications of acoustoelastic techniques in concrete stress assessment.