Numerical simulation and multi-objective optimization design of conjugate heat transfer in novel double shell-passes multi-layer helically coiled tubes heat exchangers

被引:1
作者
Yuan, Yuyang [1 ]
Cao, Jiaming [1 ]
Zhang, Zhao [1 ]
Xiao, Zhengyan [1 ]
Wang, Xuesheng [1 ]
机构
[1] East China Univ Sci & Technol, Key Lab Pressure Syst & Safety, Minist Educ, Shanghai 200237, Peoples R China
关键词
Helically coiled tubes heat exchangers; Double shell-passes structure; Differential evolution algorithm; Numerical simulation; Conjugate heat transfer; LAMINAR FORCED-CONVECTION; ENTROPY GENERATION MINIMIZATION; OPTIMAL REYNOLDS-NUMBER; TRANSFER ENHANCEMENT; PERFORMANCE OPTIMIZATION; TRANSFER COEFFICIENTS; GENETIC ALGORITHM; RESPONSE-SURFACE; FLOW; INJECTION;
D O I
10.1016/j.csite.2024.105155
中图分类号
O414.1 [热力学];
学科分类号
摘要
A novel double shell-passes multi-layer helically coiled tubes heat exchanger (DSMHCTHE) is proposed to improve the flow and heat transfer performance of the shell side. It was studied by using conjugate heat transfer numerical model. By changing coil diameter and pitch, the influence of coil torsion on the performance of the heat exchangers was investigated in the range of 0.0637-0.3183, and compared with the conventional multi-layer helically coiled tubes heat exchangers (MHCTHE). Two kinds of heat exchangers were optimized by using multi-objective optimization differential evolution algorithm. The results indicate that the coil pitch has a greater effect on the overall heat transfer coefficient, and the effects of coil pitch variations in the inner and outer helically coiled tubes follow different patterns. Compared with MHCTHE, the heat transfer rate of DSMHCTHE are increased by 13.9 %-19.1 %, the comprehensive performance is increased by 13.0 %-18.0 %, and the heat transfer entropy generation number and friction entropy generation number are lower. It shows that DSMHCTHE have better application potential as heat exchangers.
引用
收藏
页数:20
相关论文
共 46 条
[41]   Multi-objective optimization of double-layer microchannel heat sink with trapezoidal cross-sections based on computational fluid dynamics [J].
Mohammadi, Rafat ;
Dadras, Vahid .
INTERNATIONAL JOURNAL OF THERMAL SCIENCES, 2025, 214
[42]   Single/Multi-Objective Optimization Design and Numerical Studies for Lead-to-Supercritical Carbon Dioxide Heat Exchanger Based on Genetic Algorithm [J].
Li, Liangxing ;
Zhao, Haoxiang ;
Zhao, Jiayuan ;
Li, Xiangyu .
APPLIED SCIENCES-BASEL, 2022, 12 (15)
[43]   Optimal design and thermal modelling for liquid-cooled heat sink based on multi-objective topology optimization: An experimental and numerical study [J].
Li, Hao ;
Ding, Xiaohong ;
Meng, Fanzhen ;
Jing, Dalei ;
Xiong, Min .
INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER, 2019, 144
[44]   Multi-objective optimization of a phase change material-based shell-and-tube heat exchanger for cold thermal energy storage: experiments and numerical modeling [J].
Bianco, Nicola ;
Fragnito, Andrea ;
Iasiello, Marcello ;
Mauro, Gerardo Maria ;
Mongibello, Luigi .
APPLIED THERMAL ENGINEERING, 2022, 215
[45]   Numerical investigation of mixed convection in a square lid-driven cavity with influence of orientation and nanoparticle addition on heat transfer characteristics: Multi-objective optimization approach [J].
Reddy, T. Ravi Kumar ;
Srinivasan, D. R. .
JOURNAL OF THERMAL ENGINEERING, 2025, 11 (03) :685-702
[46]   A novel insight into the design of perforated-finned heat sinks based on a hybrid procedure: Computational fluid dynamics, machine learning, multi-objective optimization, and multi-criteria decision-making [J].
Abdollahi, Seyyed Amirreza ;
Alenezi, Anwur ;
Alizadeh, As 'ad ;
Jasim, Dheyaa J. ;
Ahmed, Mohsen ;
Fezaa, Laith H. A. ;
Aich, Walid ;
Ben Said, Lotfi ;
Kolsi, Lioua ;
Maleki, Hamid .
INTERNATIONAL COMMUNICATIONS IN HEAT AND MASS TRANSFER, 2024, 155