Dynamic response of RC and CFFT columns under impact loading caused by vehicle collison: Numerical simulation

被引：3
作者：
Abdallah, Maha [1 ]
Dua, Alok [1 ]
Hajiloo, Hamzeh [1 ]
Braimah, Abass [1 ]
机构：
[1] Carleton Univ, Dept Civil & Environm Engn, Ottawa, ON, Canada
来源：
STRUCTURES | 2024年 / 64卷
关键词：
Impact load; Vehicle collision; Finite element model; CFFT tubes; FLEXURAL BEHAVIOR; BRIDGE COLUMNS; STEEL; TUBE; CAPACITY;
D O I：
10.1016/j.istruc.2024.106575
中图分类号：
TU [建筑科学];
学科分类号：
0813 ;
摘要：
In this study, the dynamic response of Concrete-filled Fiber Reinforced Polymer (FRP) tubes (CFFTS) bridge columns under vehicle collision has been numerically investigated by using a numerical model verified against experimental testing data. The former experimental study investigated the behavior of including reinforced concert (RC), unreinforced CFFT and steel-reinforced CFFT columns under lateral impact loading using a pendulum machine. A three-dimensional finite-element (FE) model was developed to simulate the impact behavior of the tested columns. The comparison between numerical results and test results showed that the numerical model captured the overall behavior of the columns with reasonable accuracy. The verified FE model was used to investigate the response of CFFT bridge columns under a heavy 45-foot tractor-trailer impact. The influence of column diameter, reinforcement detailing, and impact speed were numerically studied. It was concluded that the CFFT columns performed better than RC columns when subjected to a 45-foot tractor-trailer impact at 80 Kph. It was also concluded that the threshold failure impact velocity for the considered setup is between 90-95 kph. In addition, the CFFT column diameter and impact velocity have a great influence on the impact resistance of CFFT columns.
引用
收藏
页数：12
相关论文
共 59 条
[1]   Circular concrete columns confined with GFRP tubes under repeated and sequential impact loads [J].
Abdallah, Maha ;
Hajiloo, Hamzeh ;
Braimah, Abass .
ENGINEERING STRUCTURES, 2023, 280
[2]   Numerical design optimization of the fiber orientation of glass/phenolic composite tubes based on tensile and radial compression tests [J].
Abdallah, Maha Hussein ;
Braimah, Abass .
COMPOSITE STRUCTURES, 2022, 280
[3]   Experimental evaluation and theoretical analysis of the effective flexural stiffness of reinforced CFFT columns [J].
Abdallah, Maha Hussein ;
Mohamed, Hamdy M. ;
Masmoudi, Radhouane ;
Moussa, Ahmed .
ENGINEERING STRUCTURES, 2018, 175 :155-167
[4]   Experimental assessment and theoretical evaluation of axial behavior of short and slender CFFT columns reinforced with steel and CFRP bars [J].
Abdallah, Maha Hussein ;
Mohamed, Hamdy M. ;
Masmoudi, Radhouane .
CONSTRUCTION AND BUILDING MATERIALS, 2018, 181 :535-550
[5]   Analytical modeling of moment-curvature behavior of steel and CFRP RC circular confined columns [J].
Abdallah, Maha Hussein ;
Mohamed, Hamdy M. ;
Masmoudi, Radhouane ;
Moussa, Ahmed .
COMPOSITE STRUCTURES, 2018, 189 :473-487
[6]   Nonlinear finite element analysis of short and long reinforced concrete columns confined with GFRP tubes [J].
Abdallah, Maha Hussein ;
Shazly, Mostafa ;
Mohamed, Hamdy M. ;
Masmoudi, Radhouane ;
Mousa, Ahmed .
JOURNAL OF REINFORCED PLASTICS AND COMPOSITES, 2017, 36 (13) :972-987
[7]   Analytical and Finite-Element Modeling of FRP-Concrete-Steel Double-Skin Tubular Columns [J].
Abdelkarim, Omar I. ;
ElGawady, Mohamed A. .
JOURNAL OF BRIDGE ENGINEERING, 2015, 20 (08)
[8]  
[Anonymous], 2006, LS-DYNA. n.d. theory manual for version 971
[9]   Low velocity impact performance investigation on square hollow glass columns via full-scale experiments and Finite Element analyses [J].
Bedon, Chiara ;
Kalamar, Roman ;
Eliasova, Martina .
COMPOSITE STRUCTURES, 2017, 182 :311-325
[10]  
Brackin M.S., 2009, Analysis of Large Truck Collisions with Bridge Piers: Phase 1. Report of Guidelines for Designing Bridge Piers and Abutments for Vehicle Collisions
123456