Influence of nano graphene filler on hardness, impact strength and density of glass epoxy composites

This study investigates the effects of graphene reinforcement on the hardness and impact strength of glass epoxy composites. Four different materials were examined: pure epoxy (EP), glass epoxy (GE), glass epoxy with 1 wt.% graphene (GE1), and glass epoxy with 2 wt.% graphene (GE2). The results show that the incorporation of graphene significantly enhances the hardness of the composites. Pure epoxy (EP) exhibited a Shore D hardness of 60 and an impact strength of 0.09 J/m2. The glass epoxy (GE) showed a reduction in hardness to 56 but an increased impact strength of 0.15 J/m2 due to the inclusion of 33 wt.% glass fiber. Further addition of graphene in GE1 and GE2 led to notable improvements in hardness, reaching 68 and 74 Shore D, respectively. However, the impact strength displayed a decrease with the inclusion of graphene, with GE1 and GE2 showing values of 0.13 and 0.11 J/m2, respectively. When transitioning from pure epoxy (EP) to glass epoxy (GE), there is a 6.67% decrease in hardness, while the impact strength increases by 66.67%. Introducing 1 wt.% of graphene to the glass epoxy (GE1) results in a 21.43% increase in hardness but a 13.33% decrease in impact strength. Further adding 2 wt.% of graphene (GE2) leads to an additional 8.82% increase in hardness, though the impact strength decreases by 15.38%. X-ray diffraction (XRD) analysis has revealed nano graphene presence and distribution, while fractography has revealed its effectiveness in enhancing interfacial adhesion and toughening mechanisms. Furthermore, XRD identifies potential changes in crystallinity or phase composition induced by nano graphene incorporation, further elucidating the composite's structure and properties. The study highlights the novel and significant trade-offs encountered in optimizing the mechanical properties of epoxy-based composites by incorporating graphene and glass fiber. Influence of nano graphene filler on hardness, impact strength and density of glass epoxy composites image