Robust Prescribed-Time ESO-Based Practical Predefined-Time SMC for Benthic AUV Trajectory-Tracking Control with Uncertainties and Environment Disturbance

被引:2
|
作者
Xu, Yufei [1 ]
Zhang, Ziyang [1 ]
Wan, Lei [1 ]
机构
[1] Harbin Engn Univ, Sci & Technol Underwater Vehicle Lab, Harbin 150001, Peoples R China
基金
中国国家自然科学基金;
关键词
autonomous underwater vehicles; trajectory-tracking control; prescribed-time control; adaptive control; sliding mode control; predefined-time control; SLIDING MODE CONTROL;
D O I
10.3390/jmse12061014
中图分类号
U6 [水路运输]; P75 [海洋工程];
学科分类号
0814 ; 081505 ; 0824 ; 082401 ;
摘要
The aim of this study is to address the trajectory-tracking control problem of benthic autonomous underwater vehicles (AUVs) subjected to model uncertainties and extra disturbance. In order to estimate lumped uncertainties and reconstruction speed information, this paper designs a robust prescribed-time extended state observer (RPTESO), and its prescribed time can be directly designed as an explicit parameter, without relying on the initial state of the system and complex parameter settings. In addition, an adaptive law is designed to improve the robustness of RPTSEO and reduce overshoot on the premise of ensuring convergence speed. Then, a non-singular robust practical predefined-time sliding mode control (RPPSMC) considering the hydrodynamic characteristics of AUV is designed, and the predefined time can be directly set by an explicit parameter. The RPPSMC is designed based on the lumped uncertainties estimated using RPTESO, so as to improve the control accuracy of the controller in a complex environment. Theoretical analysis and simulations demonstrated the effectiveness and superiority of the proposed method.
引用
收藏
页数:21
相关论文
共 22 条
  • [1] Prescribed-time ESO-based prescribed-time control and its application to partial IGC design
    Cui, Lei
    Jin, Nan
    NONLINEAR DYNAMICS, 2021, 106 (01) : 491 - 508
  • [2] Predefined-Time 3-D Trajectory Tracking Control of Underactuated AUVs with Predefined-time Disturbance Observer
    Liu, Junnan
    Lin, Dapeng
    Du, Jialu
    2024 14TH ASIAN CONTROL CONFERENCE, ASCC 2024, 2024, : 897 - 902
  • [3] Predefined-time trajectory tracking control of free-flying space manipulator subject to uncertainties and disturbances
    Yao, Qijia
    Li, Qing
    Huang, Mingji
    Jahanshahi, Hadi
    ROBOTICS AND AUTONOMOUS SYSTEMS, 2024, 177
  • [4] Prescribed-time Control Based on Backstepping Method for Trajectory Tracking of Robotic Manipulators
    Wang, Jiawei
    Zhang, Ying
    Zhang, Rui
    2022 41ST CHINESE CONTROL CONFERENCE (CCC), 2022, : 540 - 545
  • [5] Practical Prescribed-Time Trajectory Tracking Control for Marine Surface Vehicles
    Zeng, Daohui
    Zeng, Bowen
    Liu, Yongchao
    Zhao, Jie
    Cai, Chengtao
    IEEE TRANSACTIONS ON CIRCUITS AND SYSTEMS II-EXPRESS BRIEFS, 2024, 71 (12) : 4899 - 4903
  • [6] Predefined-time Neural Sliding Mode Control Based Trajectory Tracking of Autonomous Surface Vehicle
    Xue, Han
    Li, Shulin
    JOURNAL OF MARINE SCIENCE AND TECHNOLOGY-TAIWAN, 2023, 31 (03): : 193 - 204
  • [7] Rotation matrix-based finite-time trajectory tracking control of benthic AUV with communication bandwidth limitation
    Xu, Yufei
    Wan, Lei
    Qin, Hongde
    Miao, Jianming
    Zhu, Cheng
    JOURNAL OF VIBRATION AND CONTROL, 2024,
  • [8] Predefined-Time Tracking Control for Heterogeneous Vehicle Platoons Under Uncertain Initial Conditions Based on a Disturbance Observer
    Song, Zhankui
    Yu, Yong
    INTERNATIONAL JOURNAL OF ADAPTIVE CONTROL AND SIGNAL PROCESSING, 2025,
  • [9] Disturbance Observer-Based Prescribed-Time Tracking Control of Nonlinear Systems With Non-Vanishing Uncertainties
    Que, Ninan
    Deng, Wenxiang
    Zhou, Ning
    Yao, Jianyong
    IEEE TRANSACTIONS ON CIRCUITS AND SYSTEMS II-EXPRESS BRIEFS, 2024, 71 (06) : 3131 - 3135
  • [10] Adaptive practical prescribed-time fault-tolerant control for autonomous underwater vehicles trajectory tracking
    Li, Ye
    He, Jiayu
    Shen, Hailong
    Zhang, Wenjun
    Li, Yanying
    OCEAN ENGINEERING, 2023, 277