Design of a Biaxial Laminar Shear Box for 1g Shaking Table Tests

In this paper, the design of a new laminar shear box at the Laboratory of Earthquake Engineering and Dynamic Analysis (L.E.D.A.) of the University of Enna "Kore" (Sicily, Italy), is presented. The laminar box has been developed to investigate the liquefaction phenomenon and to validate advanced numerical models and/or the numerical approaches assessed to simulate and prevent related effects. The first part of the paper describes in detail the types of soil containers that have been used in the last three decades around the world. Particular attention is paid to laminar shear box and liquefaction studies. Moreover, the most important factors that affect the performance of a laminar shear box are reported. The last part of the paper describes components, properties, and design advantages of the new laminar shear box for 1g shaking table tests at L.E.D.A. The new laminar box has a rectangular cross section and consists of 16 layers. Each layer is composed of two frames: an inner frame and an outer frame. The inner frame has an internal dimension of 2570 mm by 2310 mm, while the outer frame has an internal dimension of 2700 mm by 2770 mm. Between the layers, there is a 20 mm gap, making the total height 1600 mm.