Effect of Ti/N Ratio on TiN Particles, Microstructures, and Toughness of Heat-Affected Zone After High Heat Input Welding of the Ca-Treated Steel Plates

被引：4

作者：

Chen, Yanli ^{[1
]}

Yang, Jian ^{[1
]}

Zhang, Yinhui ^{[1
]}

Li, Tingting ^{[1
]}

Zhang, Yuqi ^{[1
]}

机构：

[1] Shanghai Univ, Sch Mat Sci & Engn, State Key Lab Adv Special Steel, Shanghai 200444, Peoples R China

来源：

STEEL RESEARCH INTERNATIONAL | 2024年 / 95卷 / 07期

基金：

中国国家自然科学基金;

关键词：

Ca-treated steel; heat affected zone; Ti/N ratio; TiN particles; AUSTENITE GRAIN-GROWTH; IMPACT TOUGHNESS; STATIC RECRYSTALLIZATION; NITROGEN-CONTENT; INCLUSIONS; PRECIPITATION; KINETICS; HAZ;

D O I：

10.1002/srin.202400038

中图分类号：

TF [冶金工业];

学科分类号：

0806 ;

摘要：

The high heat input welding (HHIW) can greatly enhance the welding efficiency of the steel plates. However, coarse grains and brittle microstructures will be formed in the heat-affected zone (HAZ) during the HHIW process, which deteriorates the toughness of HAZ. In the present study, the effect of the Ti/N ratio on the size and distribution of titanium nitride (TiN) particles, microstructures, and toughness of HAZ after HHIW of 400 kJ cm-1 is investigated for the Ca-treated steels with different Ti/N ratios of 1.61, 3.79, and 5.00 for TN16, TN38, and TN50 steels. The TN38 steel has the highest number density of the TiN particles with the sizes between 20 and 25 nm and the highest pinning force of the particles in three steels, resulting the smallest grain sizes in its HAZ. In addition, in three steels, the TN38 steel has the main microstructure of intragranular aciculate ferrites with the highest high-angle grain boundaries density in its HAZ, thereby obtaining the highest value of low-temperature impact toughness of the HAZ. The effect of the Ti/N ratio on particles, microstructures, and toughness of the heat-affected zone after high heat input welding of 400 kJ cm-1 is investigated for Ca-treated steels with different Ti/N ratios. The steel with a Ti/N ratio of 3.79 exhibits the highest low-temperature impact toughness value in the heat-affected zone.image (c) 2024 WILEY-VCH GmbH

引用

页数：13

共 50 条

[41] Effects of coarse particles, prior austenite grains, and microstructures on impact toughness in heat-affected zone of Mg deoxidation steel plates without or with Al addition [J].

Pan, Xiaoqian ;

Yang, Jian ;

Zhong, Qingdong ;

Qiu, Yunlong ;

Cheng, Guoguang ;

Yao, Meiyi ;

Dong, Jianxin .

IRONMAKING & STEELMAKING, 2021, 48 (08) :962-972

[42] Role of microstructures on fracture toughness of heat affected zone of Ti-killed steel [J].

Yokoyama, K ;

Ishikawa, H ;

Nagumo, M .

TETSU TO HAGANE-JOURNAL OF THE IRON AND STEEL INSTITUTE OF JAPAN, 1997, 83 (12) :803-808

[43] TiN-containing high-heat-input welding steels: Optimizing Ti/N ratio and precipitation temperature for enhanced low-temperature impact toughness in coarse-grained heat-affected zones [J].

Hao, Junjie ;

Wang, Chao ;

Duan, Hua ;

Yan, Zhu ;

Yuan, Guo ;

Wang, Guo-dong .

JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T, 2025, 36 :9641-9651

[44] The Influence of the Second Phase on the Microstructure Evolution of the Welding Heat-Affected Zone of Q690 Steel with High Heat Input [J].

Qi, Huan ;

Pang, Qihang ;

Li, Weijuan ;

Bian, Shouyuan .

MATERIALS, 2024, 17 (03)

[45] Effect of Si Content on the Microstructures and Toughness in Heat-Affected Zone of Offshore Engineering Steels with Mg Deoxidation [J].

Pan, Xiaoqian ;

Yang, Jian ;

Zhang, Yinhui ;

Li, Rongbin .

STEEL RESEARCH INTERNATIONAL, 2023, 94 (03)

[46] Effect of Molybdenum on the Impact Toughness of Heat-Affected Zone in High-Strength Low-Alloy Steel [J].

Wu, Xiaoyan ;

Xiao, Pengcheng ;

Wu, Shujing ;

Yan, Chunliang ;

Ma, Xuegang ;

Liu, Zengxun ;

Chen, Wei ;

Zhu, Liguang ;

Zhang, Qingjun .

MATERIALS, 2021, 14 (06)

[47] Mechanical properties of arc welding heat-affected zone of high nitrogen steel [J].

Du Wan-sheng ;

Zhao Lin ;

Tian Zhi-ling ;

Peng Yun ;

Xu Liang-hong .

JOURNAL OF IRON AND STEEL RESEARCH INTERNATIONAL, 2007, 14 :263-267

[48] N-induced microstructure refinement and toughness improvement in the coarse grain heat-affected zone of a low carbon Mo-V-Ti-B steel subjected to a high heat input welding thermal cycle [J].

Fan, Huibing ;

Shi, Genhao ;

Peng, Tong ;

Wang, Qiuming ;

Wang, Leping ;

Wang, Qingfeng ;

Zhang, Fucheng .

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2021, 824

[49] Effect of Heat Input on M-A Constituent and Toughness of Coarse Grain Heat-Affected Zone in an X100 Pipeline Steel [J].

Wang, Xiao-Nan ;

Zhao, Yan-Jun ;

Guo, Peng-Fei ;

Qi, Xiao-Nan ;

Di, Hong-Shuang ;

Zhang, Min ;

Chen, Chang-Jun .

JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE, 2019, 28 (03) :1810-1821

[50] Effect of Heat Input on M-A Constituent and Toughness of Coarse Grain Heat-Affected Zone in an X100 Pipeline Steel [J].

Xiao-Nan Wang ;

Yan-Jun Zhao ;

Peng-Fei Guo ;

Xiao-Nan Qi ;

Hong-Shuang Di ;

Min Zhang ;

Chang-Jun Chen .

Journal of Materials Engineering and Performance, 2019, 28 :1810-1821

← 1 2 3 4 5 →