Improvement in Fretting Wear Properties of AISI 4135 Steel by Laser-Cladded Martensitic Stainless Steel Coatings

被引：2
作者：
Huang, Yuanzhe [1 ]
Zhang, Mingyuan [1 ]
Xia, Dianxiu [1 ]
Wang, Shouren [1 ]
Cai, Yuquan [2 ]
Zhang, Han [1 ]
机构：
[1] Univ Jinan, Sch Mech Engn, Jinan 250022, Shandong, Peoples R China
[2] Shandong UXG Bearing MFG Co Ltd, Liaocheng 252665, Shandong, Peoples R China
来源：
JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE | 2024年
基金：
中国国家自然科学基金;
关键词：
fretting; laser cladding; martensitic stainless steel powder; wear mechanism; OXALIC-ACID; MICROSTRUCTURE; DEPOSITION; CORROSION; ALLOY;
D O I：
10.1007/s11665-024-09598-x
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
To inhibit the fretting wear of the locking mechanism of the variable-gauge high-speed trains, the substrate (AISI 4135 steel) was treated by laser cladding with 420 martensitic stainless steel powders. The microstructure and fretting behavior of substrate and cladding layers under different laser powers and scanning speeds were analyzed. The results showed that the microstructure of the cladding layer mainly was lath martensite and carbides, with the formation of alpha-Fe, (Fe, Cr) solid solutions, Fe3Si, carbides (Fe, Cr) 23C6, and Fe3C cementite phases. Compared with the substrate, the surface hardness of the cladding layer increased from 290 HV0.2 to 478-587 HV0.2, and the wear rate decreased by 51-81%. Besides, adhesive wear, fatigue wear, and oxidation wear were the main wear mechanisms of the substrate. However, only abrasive wear and oxidation wear were found on the cladding layer. The strengthening mechanism of the cladding layer was mainly attributed to the strengthening effect of grain refinement, solid solution, and precipitation phase.
引用
收藏
页码：5974 / 5988
页数：15
相关论文
共 65 条
  • [1] Friction, wear, and airborne particle emissions from rail-wheel contact with laser cladded overlays-A pin-disc tribometer simulation
    Ali, Nashit
    Olofsson, Ulf
    Dizdar, Senad
    [J]. WEAR, 2023, 518
  • [2] Dynamic Simulation Analysis on Axle Spline of High-Speed Train Gauge-Change System
    Bai, Jinyi
    Wang, Wenjing
    Zhou, Pingyu
    Wang, Yuguang
    [J]. SHOCK AND VIBRATION, 2021, 2021
  • [3] Investigations on the corrosion of copper patterns in the course of the "post-CMP cleaning" of integrated electronic microcircuits in oxalic acid aqueous solutions
    Bernard, M. C.
    Gabrielli, C.
    Joiret, S.
    Mace, C.
    Ostermann, E.
    Pailleret, A.
    [J]. ELECTROCHIMICA ACTA, 2007, 53 (03) : 1325 - 1335
  • [4] Research on high-temperature friction and wear performances of Stellite 12 laser cladding layer against coated boron steels
    Chen, Wei
    Peng, Yuchun
    Wang, Yifan
    Cao, Peng
    Zhu, Yingxia
    Guo, Yuqin
    [J]. WEAR, 2023, 520
  • [5] In-situ quench and tempering for microstructure control and enhanced mechanical properties of laser cladded AISI 420 stainless steel powder on 300M steel substrates
    Da Sun, Shi
    Fabijanic, Daniel
    Barr, Cameron
    Liu, Qianchu
    Walker, Kevin
    Matthews, Neil
    Orchowski, Nick
    Easton, Mark
    Brandt, Milan
    [J]. SURFACE & COATINGS TECHNOLOGY, 2018, 333 : 210 - 219
  • [6] Microstructure, crystallographic aspects and mechanical properties of AISI 420 martensitic stainless steel after different thermomechanical process routes
    de Moura, Ariane Neves
    de Alcantara, Claudio Moreira
    Vieira, Estefano Aparecido
    Labiapari, Wilian da Silva
    da Cunha, Marco Antonio
    de Oliveira, Tarcisio Reis
    D'Azeredo Orlando, Marcos Tadeu
    [J]. MATERIALS CHEMISTRY AND PHYSICS, 2023, 305
  • [7] Optimization and wear behaviors of 316L stainless steel laser cladding on rail material
    Ding, Haohao
    Yang, Tao
    Wang, Wenjian
    Zhu, Yi
    Lin, Qiang
    Guo, Jun
    Xiao, Qian
    Gan, Lu
    Liu, Qiyue
    [J]. WEAR, 2023, 523
  • [8] Effect of laser claddings of Fe-based alloy powder with different concentrations of WS2 on the mechanical and tribological properties of railway wheel
    Ding, Haohao
    Mu, Xinpeng
    Zhu, Yi
    Yang, Wenbin
    Xiao, Qian
    Wang, Wenjian
    Liu, Qiyue
    Guo, Jun
    Zhou, Zhongrong
    [J]. WEAR, 2022, 488
  • [9] Investigation on microstructure and wear characteristic of laser cladding Fe-based alloy on wheel/rail materials
    Fu, Z. K.
    Ding, H. H.
    Wang, W. J.
    Liu, Q. Y.
    Guo, J.
    Zhu, M. H.
    [J]. WEAR, 2015, 330 : 592 - 599
  • [10] Effect of laser cladding speed on microstructure and properties of titanium alloy coating on low carbon steel
    Gao, Wei
    Wang, Shi-cheng
    Hu, Kang-kai
    Jiang, Xu-zhou
    Yu, Hong-ying
    Sun, Dong-bai
    [J]. SURFACE & COATINGS TECHNOLOGY, 2022, 451
1234567