Effect of Ta addition on primary MC carbide in Ti-Nb-Mo-W-alloyed superalloy

被引:3
作者
Gao, Xiaoyong [1 ]
Zhang, Lifeng [2 ]
机构
[1] Yanshan Univ, Sch Mech Engn, Qinhuangdao 066004, Hebei, Peoples R China
[2] North China Univ Technol, Sch Mech & Mat Engn, Beijing 100144, Peoples R China
基金
中国国家自然科学基金;
关键词
Superalloy; Primary carbide; Three-dimensional morphology; Thermodynamic calculation; Tantalum; NI-BASED SUPERALLOY; BASE SUPERALLOY; CYCLE FATIGUE; BEHAVIOR; MICROSTRUCTURE; INCLUSIONS; MORPHOLOGY; STABILITY; EVOLUTION; TANTALUM;
D O I
10.1016/j.matchar.2024.113918
中图分类号
T [工业技术];
学科分类号
08 ;
摘要
The effect of Ta addition on characterization of primary MC carbides with regard to their morphology, composition, and size in Ti-Nb-Mo-W-alloyed Ni-based superalloy were investigated. Several tools including automated scanning electron microscopy as well as electrolytic etching technology were used for broad characterization of carbides including three-dimensional morphology. The addition of Ta significantly influences the composition and morphology of primary MC carbides. Large dendrite (Ti,Nb,W,Mo)C carbides were changed to smaller (Ta,Ti,Nb)C carbides. The hardness of both MC primary carbides and the matrix were increased. MC carbides in the studied superalloys were developed dendrite in three-dimensional morphology, which was much larger than that in two-dimensional morphology. The formation mechanism of carbides was clarified by thermodynamic calculation.
引用
收藏
页数:7
相关论文
共 32 条
[1]   The effects of Mg microaddition on the mechanical behavior and fracture mechanism of MAR-M247 superalloy at elevated temperatures [J].
Bor, HY ;
Chao, CG ;
Ma, CY .
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 1999, 30 (03) :551-561
[2]   Investigation of Oxide Inclusions and Primary Carbonitrides in Inconel 718 Superalloy Refined through Electroslag Remelting Process [J].
Chen, Xi-Chun ;
Shi, Cheng-Bin ;
Guo, Han-Jie ;
Wang, Fei ;
Ren, Hao ;
Feng, Di .
METALLURGICAL AND MATERIALS TRANSACTIONS B-PROCESS METALLURGY AND MATERIALS PROCESSING SCIENCE, 2012, 43 (06) :1596-1607
[3]   STATE-OF-THE-ART OF SUPERALLOY PRODUCTION FOR AEROSPACE AND OTHER APPLICATION USING VIM VAR OR VIM ESR [J].
CHOUDHURY, A .
ISIJ INTERNATIONAL, 1992, 32 (05) :563-574
[4]   The effects of Ti and Ta on the microstructure and high temperature deformation mechanisms of the CoNi-based superalloys [J].
Chu, Chunhe ;
Guo, Qianying ;
Ding, Ran ;
Liu, Yongchang .
MATERIALS CHARACTERIZATION, 2023, 199
[5]   Evolution of Tantalum Content During Vacuum Induction Melting and Electroslag Remelting of a Novel Martensitic Steel [J].
Detrois, Martin ;
Jablonski, Paul D. ;
Hawk, Jeffrey A. .
METALLURGICAL AND MATERIALS TRANSACTIONS B-PROCESS METALLURGY AND MATERIALS PROCESSING SCIENCE, 2019, 50 (04) :1686-1695
[6]   Effect of Ta addition on solidification microstructure and element segregation of IN617B nickel-base superalloy [J].
Gao, Shuang ;
Song, Zhen-feng ;
He, Bo ;
Zhou, Lan-zhang ;
Hou, Jie-shan .
TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA, 2022, 32 (02) :559-568
[7]   Effect of Ta on microstructural evolution and mechanical properties of a solid-solution strengthening cast Ni-based alloy during long-term thermal exposure at 700 °C [J].
Gao, Shuang ;
Hou, Jieshan ;
Yang, Fei ;
Guo, Yongan ;
Zhou, Lanzhang .
JOURNAL OF ALLOYS AND COMPOUNDS, 2017, 729 :903-913
[8]   Precipitation kinetics of niobium carbide (NbC) during homogenization heat treatment of additively manufactured inconel 718 superalloy [J].
Ghaemifar, Sajad ;
Mirzadeh, Hamed .
JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T, 2023, 25 :1774-1781
[9]   Influence of Ta content on hot corrosion behaviour of a directionally solidified nickel base superalloy [J].
Han, F. F. ;
Chang, J. X. ;
Li, H. ;
Lou, L. H. ;
Zhang, J. .
JOURNAL OF ALLOYS AND COMPOUNDS, 2015, 619 :102-108
[10]   Effects of hot compression on carbide precipitation behavior of Ni-20Cr-18W-1Mo superalloy [J].
Han, Yin-ben ;
Xue, Xiang-yi ;
Zhang, Tie-bang ;
Hu, Rui ;
Li, Jin-shan .
TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA, 2016, 26 (11) :2883-2891