The Effect of Sulfuric Acid Anodization on the Electrochemical Properties of Aluminum Alloy AlSi10Mg Prepared by Selective Laser Melting

Aluminum alloy, AlSi10Mg, prepared by selective laser melt (SLM) fabrication was anodized in 9.8% sulfuric acid (Type II) at 15 V for a total of 23 min. Experiments were performed to study the potentiostatic anodization process and its effects on the oxide coating morphology, thickness, and electrochemical properties of the alloy. Prior to anodization, the alloy microstructure is composed of aluminum cells encapsulated in a silicon network. Anodizing the abraded and polished AlSi10Mg surface produced a porous oxide layer with a thickness of 5 mu m. The oxide coating weight was 698 +/- 29 mg/ft(2). The oxide coating forms in the aluminum cells that are isolated from one another by the silicon eutectic phase. In electrochemical tests, the anodic and cathodic potentiodynamic polarization currents were suppressed by factors of 15x and 215x, respectively, as compared to the unanodized controls. The data indicate the anodic oxide coating suppresses the cathodic more than the anodic reaction rate. Linear polarization resistance (R p) values increased by 279x after anodization. The corrosion current density values (j corr) decreased by 133x after anodization. Taken together, the electrochemical data indicate the anodic oxide coating (unsealed) increases the corrosion resistance of the SLM alloy by two orders of magnitude.