Design and Characterization of Hierarchically-Strengthened, Cast Al-Ce-Ni-Mn-Sc-Zr Alloys for High-Temperature Applications

被引：0

作者：

Ekaputra, Clement N. ^{[1
]}

Rakhmonov, Jovid U. ^{[1
,2
]}

Senvardarli, Ekin ^{[1
]}

Weiss, David ^{[3
]}

Mogonye, Jon-Erik ^{[4
]}

Dunand, David C. ^{[1
]}

机构：

[1] Northwestern Univ, Dept Mat Sci & Engn, Evanston, IL 60208 USA

[2] Oak Ridge Natl Lab, Mat Sci & Technol Div, Oak Ridge, TN USA

[3] Eck Ind, Manitowoc, WI 54220 USA

[4] US Army Combat Capabil Dev Command, Army Res Lab, Aberdeen Proving Ground, MD 21005 USA

来源：

LIGHT METALS 2024 | 2024年

关键词：

Aluminum alloys; Microstructure; Mechanical properties; High-temperature; Hierarchical strengthening; MECHANICAL-PROPERTIES; CREEP; AMBIENT; SILICON; ORIGIN; CERIUM;

D O I：

10.1007/978-3-031-50308-5_32

中图分类号：

O646 [电化学、电解、磁化学];

学科分类号：

081704 ;

摘要：

We characterize the microstructure and mechanical properties of cast Al-Ce-Ni-Mn-Sc-Zr alloys designed for structural use above 300 degrees C. We first report on the effect of Ni on the as-cast phase formation, where all alloys consist of fine Al11Ce3 and Ni-rich eutectic phases, but the identity of the Ni-rich phase varies with Ni content. Furthermore, these alloys contain four coarsening-resistant strengthening phases as determined from SEM and APT investigations: (i) Al11Ce3 and (ii) Ni-rich micron-scale platelets formed during eutectic solidification, (iii) Ll(2)-Al-3(Sc,Zr) nanoprecipitates formed during secondary aging, and (iv) Mn solute in the alpha-Al matrix. The Al-Ce-Ni-MnSc-Zr alloy possesses higher microhardness and creep resistance than compositionally simpler alloys containing fewer of the strengthening phases, indicating that these strengthening mechanisms synergize to provide increased ambient- and elevated-temperature strength.

引用

页码：255 / 262

页数：8

共 43 条

[21] Microstructural Evolution and High-Temperature Performance of High-Pressure Die-Cast Al-Si-Mg Alloys Through Mn and Zr Alloying [J].

Wang, Yao ;

Xia, Xingchuan ;

Wang, Jiangbo ;

Qi, Wenshu ;

Li, Chong ;

Ding, Jian ;

Liu, Yongchang .

JOM, 2025, 77 (07) :5673-5684

[22] Development of High-Strength High-Temperature Cast Al-Ni-Cr Alloys Through Evolution of a Novel Composite Eutectic Structure [J].

Pandey, P. ;

Kashyap, S. ;

Tiwary, C. S. ;

Chattopadhyay, K. .

METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 2017, 48A (12) :5940-5950

[23] Characterization of phase development in non-isothermally annealed mould-cast and heat-treated Al-Mn-Sc-Zr alloys [J].

Vlach, M. ;

Stulikova, I. ;

Smola, B. ;

Zaludova, N. .

MATERIALS CHARACTERIZATION, 2010, 61 (12) :1400-1405

[24] Novel Al-Cu-Mn-Zr-Sc Compositions Exhibiting Increased Mechanical Performance after a High-Temperature Thermal Exposure [J].

Lamb, Justin ;

Rouxel, Baptiste ;

Langan, Timothy ;

Dorin, Thomas .

JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE, 2020, 29 (09) :5672-5684

[25] Novel Al-Cu-Mn-Zr-Sc Compositions Exhibiting Increased Mechanical Performance after a High-Temperature Thermal Exposure [J].

Justin Lamb ;

Baptiste Rouxel ;

Timothy Langan ;

Thomas Dorin .

Journal of Materials Engineering and Performance, 2020, 29 :5672-5684

[26] High-temperature mechanical behaviour of Al-10Ce alloy with Sc, Zr, Si, and Mg alloying elements [J].

Keerti, Shishir ;

Shurkin, Pavel ;

Cai, Qing ;

Nadendla, Hari Babu ;

Mandal, Animesh .

MATERIALS & DESIGN, 2024, 248

[27] Ambient- and high-temperature mechanical properties of isochronally aged Al-0.06Sc, Al-0.06Zr and Al-0.06Sc-0.06Zr (at.%) alloys [J].

Knipling, Keith E. ;

Seidman, David N. ;

Dunand, David C. .

ACTA MATERIALIA, 2011, 59 (03) :943-954

[28] EFFECT OF Ni AND Mn ADDITIONS ON THE AMBIENT AND HIGH-TEMPERATURE PERFORMANCE OF Zr-CONTAINING Al-Si-Cu-Mg-BASED ALLOYS: ROLE OF PRECIPITATION HARDENING [J].

Alyaldin, Loay ;

Abdelaziz, M. H. ;

Samuel, Agnes M. ;

Samuel, Fawzy H. ;

Doty, Herbert W. ;

Valtierra, Salvador .

INTERNATIONAL JOURNAL OF METALCASTING, 2018, 12 (04) :825-838

[29] High-Temperature Tribological Behavior of Al0.3Cr0.5Fe1.5Mn0.5Ni High-Entropy Alloys With Addition of Titanium and Carbon [J].

Peng, Chun-Hao ;

Tsai, Che-Wei ;

Kuo, Chia-Ming ;

Chiu, Sheng-Min .

FRONTIERS IN MATERIALS, 2022, 8

[30] Effect of combined addition of Ni and Sc on microstructure and high-temperature mechanical properties of an Al-Cu-Mn alloy [J].

Zhu, Ruofei ;

Chen, Weidong ;

Chen, Zhu ;

Sui, Yi ;

Qu, Yinhui .

JOURNAL OF ALLOYS AND COMPOUNDS, 2025, 1023

← 1 2 3 4 5 →