Design and Characterization of Hierarchically-Strengthened, Cast Al-Ce-Ni-Mn-Sc-Zr Alloys for High-Temperature Applications

被引：0

作者：

Ekaputra, Clement N. ^{[1
]}

Rakhmonov, Jovid U. ^{[1
,2
]}

Senvardarli, Ekin ^{[1
]}

Weiss, David ^{[3
]}

Mogonye, Jon-Erik ^{[4
]}

Dunand, David C. ^{[1
]}

机构：

[1] Northwestern Univ, Dept Mat Sci & Engn, Evanston, IL 60208 USA

[2] Oak Ridge Natl Lab, Mat Sci & Technol Div, Oak Ridge, TN USA

[3] Eck Ind, Manitowoc, WI 54220 USA

[4] US Army Combat Capabil Dev Command, Army Res Lab, Aberdeen Proving Ground, MD 21005 USA

来源：

LIGHT METALS 2024 | 2024年

关键词：

Aluminum alloys; Microstructure; Mechanical properties; High-temperature; Hierarchical strengthening; MECHANICAL-PROPERTIES; CREEP; AMBIENT; SILICON; ORIGIN; CERIUM;

D O I：

10.1007/978-3-031-50308-5_32

中图分类号：

O646 [电化学、电解、磁化学];

学科分类号：

081704 ;

摘要：

We characterize the microstructure and mechanical properties of cast Al-Ce-Ni-Mn-Sc-Zr alloys designed for structural use above 300 degrees C. We first report on the effect of Ni on the as-cast phase formation, where all alloys consist of fine Al11Ce3 and Ni-rich eutectic phases, but the identity of the Ni-rich phase varies with Ni content. Furthermore, these alloys contain four coarsening-resistant strengthening phases as determined from SEM and APT investigations: (i) Al11Ce3 and (ii) Ni-rich micron-scale platelets formed during eutectic solidification, (iii) Ll(2)-Al-3(Sc,Zr) nanoprecipitates formed during secondary aging, and (iv) Mn solute in the alpha-Al matrix. The Al-Ce-Ni-MnSc-Zr alloy possesses higher microhardness and creep resistance than compositionally simpler alloys containing fewer of the strengthening phases, indicating that these strengthening mechanisms synergize to provide increased ambient- and elevated-temperature strength.

引用

页码：255 / 262

页数：8

共 48 条

[11] Effect of Mn on Microstructure and Mechanical Properties of Al-4Ni Alloy [J].

Fang, Jiao ;

Dong, Xixi ;

Ji, Shouxun .

JOM, 2021, 73 (12) :3819-3826

[12] Dispersoid strengthening of a high temperature Al-Si-Cu-Mg alloy via Mo addition [J].

Farkoosh, A. R. ;

Chen, X. Grant ;

Pekguleryuz, M. .

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2015, 620 :181-189

[13] Enhanced age-hardening response and creep resistance of an Al-0.5Mn-0.3Si (at.%) alloy by Sn inoculation [J].

Farkoosh, Amir R. ;

Dunand, David C. ;

Seidman, David N. .

ACTA MATERIALIA, 2022, 240

[14] Solute-induced strengthening during creep of an aged-hardened Al-Mn-Zr alloy [J].

Farkoosh, Amir R. ;

Dunand, David C. ;

Seidman, David N. .

ACTA MATERIALIA, 2021, 219

[15]

Frost H.J., 1982, Deformation Mechanism Maps: the Plasticity and Creep of Metals and Ceramics

[16] Mechanical properties of Al(Sc,Zr) alloys at ambient and elevated temperatures [J].

Fuller, CB ;

Seidman, DN ;

Dunand, DC .

ACTA MATERIALIA, 2003, 51 (16) :4803-4814

[17] Temporal evolution of the nanostructure of AI(Sc,Zr) alloys:: Part I -: Chemical compositions of Al3(Sc1-xZrx) precipitatesy [J].

Fuller, CB ;

Murray, JL ;

Seidman, DN .

ACTA MATERIALIA, 2005, 53 (20) :5401-5413

[18] Segregation-sandwiched stable interface suffocates nanoprecipitate coarsening to elevate creep resistance [J].

Gao, Y. H. ;

Guan, P. F. ;

Su, R. ;

Chen, H. W. ;

Yang, C. ;

He, C. ;

Cao, L. F. ;

Song, H. ;

Zhang, J. Y. ;

Zhang, X. F. ;

Liu, G. ;

Nie, J. F. ;

Sun, J. ;

Ma, E. .

MATERIALS RESEARCH LETTERS, 2020, 8 (12) :446-453

[19]

Hellman OC, 2000, MICROSC MICROANAL, V6, P437, DOI 10.1007/s100050010051

[20] On the origin of the high coarsening resistance of Ω plates in Al-Cu-Mg-Ag alloys [J].

Hutchinson, CR ;

Fan, X ;

Pennycook, SJ ;

Shiflet, GJ .

ACTA MATERIALIA, 2001, 49 (14) :2827-2841

← 1 2 3 4 5 →