Impact of austenite nanograins induced by sliding friction on interfacial strength during ultrasonic welding

被引：2

作者：

Chu, Hue-En ^{[1
]}

Sun, Yi-Hsuan ^{[2
]}

Chen, Tai-Cheng ^{[3
]}

Yen, Hung-Wei ^{[2
]}

Lin, Jhe-Yu ^{[1
]}

机构：

[1] Natl Taipei Univ Technol, Dept Mech Engn, 1,Sec 3,Zhongxiao E Rd, Taipei 10608, Taiwan

[2] Natl Taiwan Univ, Dept Mat Sci & Engn, Taipei, Taiwan

[3] Inst Nucl Energy Res, Nucl Fuels & Mat Div, Taoyuan, Taiwan

来源：

SCIENCE AND TECHNOLOGY OF WELDING AND JOINING | 2024年 / 29卷 / 01期

关键词：

ultrasonic welding; stainless steels; grain refinement; nanograins; dynamic recrystallisation; 316L STAINLESS-STEEL; BONDING INTERFACE; GRAIN-STRUCTURE; ALLOY; ALUMINUM; MICROSTRUCTURE; DEFORMATION; EVOLUTION; PHASE; TEMPERATURE;

D O I：

10.1177/13621718231212635

中图分类号：

T [工业技术];

学科分类号：

08 ;

摘要：

This study investigated the effect of nanograin formation on joint strength through sliding friction during ultrasonic welding (USW). The nanograined austenite phase would induce the surface strengthening effect, potentially impeding the bonding process. A bonding strength exceeded 2000 N within a short welding duration of 2.5 s. Interestingly, the strength was attributed to ultrafine-grained interfacial microstructure resulting from the plastic flow during processing. This unique nanograined microstructure formed from dynamic recrystallisation unexpectedly facilitated the bond formation rather than hindering the bonding process. This study gained insights into the critical interfacial microstructure required for the USW of metals and alloys with high melting temperatures.

引用

页码：3 / 11

页数：9

共 50 条

[31] Effect of Axial Ultrasonic Vibration on Metal Flow Behavior During Friction Stir Welding
He Changshu
Qie Mofan
Zhang Zhiqiang
Zhao Xiang
ACTA METALLURGICA SINICA, 2021, 57 (12) : 1614 - 1626
[32] Heterogeneous structure-induced strength and ductility synergy of α-brass subjected to rapid cooling friction stir welding
Xu, Nan
Chen, Lei
Gu, Bo-kun
Ren, Zi-ke
Song, Qi-ning
Bao, Ye-feng
TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA, 2021, 31 (12) : 3785 - 3799
[33] Asymmetric distribution of microstructure and impact toughness in stir zone during friction stir processed a high strength pipeline steel
Xie, G. M.
Cui, H. B.
Luo, Z. A.
Misra, R. D. K.
Wang, G. D.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2017, 704 : 401 - 411
[34] In situ observation of bainite to austenite transformation of microalloyed high strength steel during simulated welding cycle
Lei, X. W.
Wang, H. H.
Wu, K. M.
Shirzadi, A. A.
Yin, Y. Q.
Wu, N. C.
SCIENCE AND TECHNOLOGY OF WELDING AND JOINING, 2014, 19 (05) : 402 - 407
[35] The formation mechanism of austenite in the ultrahigh strength-toughness medium-Mn steel weld via friction stir welding
Wang, Y. Q.
Ding, Y. X.
Duan, R. H.
Luo, Z. A.
Xie, G. M.
MATERIALS CHARACTERIZATION, 2023, 203
[36] Multi-response optimisation of rotary friction welding of austenite stainless steel tube joints for improved strength and corrosion resistance
Samuel, R. Harris
Srinivasan, K.
Balasubramanian, V.
Razalrose, A.
MULTISCALE AND MULTIDISCIPLINARY MODELING EXPERIMENTS AND DESIGN, 2024, 7 (06) : 6207 - 6230
[37] Effect of Ni Addition on the Interfacial Strength of Al/Cu Dissimilar Welds Produced by Friction Stir Lap Welding
Kurabayashi, Kota
Tokita, Shun
Sato, Yutaka S.
METALS, 2022, 12 (03)
[38] Continuous dynamic recrystallization during friction stir welding of high strength aluminum alloys
Jata, KV
Semiatin, SL
SCRIPTA MATERIALIA, 2000, 43 (08) : 743 - 749
[39] Analysis of microstructural evolution during friction stir welding of ultrahigh-strength steel
Ghosh, M.
Kumar, K.
Mishra, R. S.
SCRIPTA MATERIALIA, 2010, 63 (08) : 851 - 854
[40] Interfacial strength saturation due to local melting at bonding interface in ultrasonic welding of 7075 aluminum alloy to 316L stainless steel
Chiu, Hsiang-Yi
Huang, Jhong-Ren
Lin, Jhe-Yu
MATERIALS LETTERS, 2024, 362

← 1 2 3 4 5 →