Manufacturing and performance of sandwich composite panels with recycled PET foam core made by continuous roll forming

被引：3
|
作者：
Mandegarian, Sepanta [1 ]
Hojjati, Mehdi [1 ]
机构：
[1] Concordia Univ, Concordia Ctr Compos CONCOM, Montreal, PQ, Canada
来源：
MANUFACTURING LETTERS | 2024年 / 40卷
基金：
加拿大自然科学与工程研究理事会;
关键词：
PET core panel; Composite sandwich panel; Double -belt fabrication process; Peel -off test; Flatwise test; THERMOPLASTIC COMPOSITES; IMPREGNATION;
D O I：
10.1016/j.mfglet.2024.03.019
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
A parametrical study has been conducted for double-belt laminating method to optimize the manufacturing process of composite sandwich panels. Examinations have been done to assess the adhesion bonding characteristics between the skin and core. The outcomes of peel-off and flatwise tests revealed that an adequate connection was formed between the composite facesheets and PET core. Finally, the performance of panels was evaluated under three-point bending conditions. In this test series, while the sandwich panels' main failure mechanism is top facesheet buckling, traces of the proper adhesion formed between the foam core and facesheet were detected within the damaged surfaces. (c) 2024 Society of Manufacturing Engineers (SME). Published by Elsevier Ltd. All rights reserved.
引用
收藏
页码：89 / 92
页数：4
相关论文
共 50 条
  • [1] Thermoplastic composite sandwich panels with recycled PET foam core: A manufacturing process assessment
    Mandegarian, Sepanta
    Hojjati, Mehdi
    Moghaddar, Hassan
    JOURNAL OF THERMOPLASTIC COMPOSITE MATERIALS, 2024,
  • [2] Recycled PET foam core sandwich panels with reinforced hybrid composite facesheets: A sustainable approach for enhanced impact resistance
    Mandegarian, Sepanta
    Hojjati, Mehdi
    Moghaddar, Hassan
    JOURNAL OF SANDWICH STRUCTURES & MATERIALS, 2025, 27 (02) : 396 - 428
  • [3] Indentation study of foam core sandwich composite panels
    Rizov, V
    Shipsha, A
    Zenkert, D
    COMPOSITE STRUCTURES, 2005, 69 (01) : 95 - 102
  • [4] Effects of material non-linearity on the structural performance of sandwich beams made of recycled PET foam core and PET fiber composite facings: Experimental and analytical studies
    Kassab, Raghad
    Sadeghian, Pedram
    STRUCTURES, 2023, 54 : 1259 - 1277
  • [5] Tensile properties of composite metal foam and composite metal foam core sandwich panels
    Marx, Jacob
    Rabiei, Afsaneh
    JOURNAL OF SANDWICH STRUCTURES & MATERIALS, 2021, 23 (08) : 3773 - 3793
  • [6] Insight into the shear behaviour of composite sandwich panels with foam core
    Mostafa, A.
    Shankar, K.
    Morozov, E. V.
    MATERIALS & DESIGN, 2013, 50 : 92 - 101
  • [7] In situ L-RTM manufacturing of sandwich panels with PET foam core reinforced by polymeric pins
    Delucis, Rafael de Avila
    Tonatto, Maikson Luiz Passaia
    Trindade, Rafael Sheer
    Amico, Sandro Campos
    JOURNAL OF SANDWICH STRUCTURES & MATERIALS, 2021, 23 (01) : 241 - 254
  • [8] Impact of the bio content of polymeric matrices on flexural performance of sandwich beams made of PET fiber composite facings and recycled PET honeycomb core
    Kassab, Raghad
    Sadeghian, Pedram
    STRUCTURES, 2023, 57
  • [9] Laser Forming of Metal Foam Sandwich Panels: Effect of Panel Manufacturing Method
    Bucher, Tizian
    Zhang, Min
    Chen, Chang Jun
    Verma, Ravi
    Li, Wayne
    Yao, Y. Lawrence
    JOURNAL OF MANUFACTURING SCIENCE AND ENGINEERING-TRANSACTIONS OF THE ASME, 2019, 141 (05):
  • [10] Influence of imperfections on the performance of metal foam core sandwich panels
    Bart-Smith, H
    Hutchinson, JW
    Fleck, NA
    Evans, AG
    INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES, 2002, 39 (19) : 4999 - 5012
12345