A review on microstructure and mechanical properties of Inconel 625 alloy fabricated using wire arc additive manufacturing process

PurposeWire arc additive manufacturing (WAAM) is one of the most researched and fastest-growing AM technique because of its capability to produce larger components with medium complexity. In recent times, the use of WAAM process has been increased because of its ability to produce complex components economically when compared with other AM techniques. The purpose of this study is to investigate the capabilities of wire arc additive manufacturing (WAAM), which has emerged as a recognized method for fabricating larger components with complex geometries.Design/methodology/approachThis paper provides a review of process parameters for optimizing and analyzing mechanical properties, hardness, microstructure and corrosion behavior achieved through various WAAM-based techniques.FindingsLimited analysis exists regarding the mechanical properties of various orientations of Inconel 625 alloy. Moreover, there is a lack of studies concerning the corrosion behavior of Inconel 625 alloy fabricated using WAAM.Originality/valueThe review identifies that the formation of intermetallic phases reduces the desirability of mechanical properties and corrosion resistance of WAAM-fabricated Inconel 625 alloy. Additionally, the study reported notable results obtained by various research studies and the improvements to be achieved in the future.