Optimization of the coating process in the PEGylated chitosan-based doped cobalt ferrite nanoparticles for hyperthermia applications using the Taguchi method

In this study, the parameters of coating process in the PEGylated chitosan-based doped cobalt ferrite nanoparticles for hyperthermia applications was optimized using the Taguchi method. The effect of chitosan and polyethylene glycol as well as the glutaraldehyde (crosslinker) contents on the structural, microstructural, and magnetic properties and the colloidal stability of the nanoparticles were investigated. Ultimately, to optimize the properties of the nanoparticles, the Taguchi method (L16 orthogonal array) was employed. The incorporation of the Ca2+ and Gd3+ into the spinel structure with an average crystallite size of 21 nm was successfully verified by X-ray diffraction (XRD) and the Rietveld refinement analysis. Moreover, thermogravimetric (TGA) analysis and Fourier-transform infrared spectroscopy (FT-IR) demonstrated the effective functionalization of the chitosan and polyethylene glycol coatings. Vibrating sample magnetometer (VSM) measurements revealed that saturation magnetization ( M s ) was achieved in the range of 54.91-60.42 emu/g. Also, microstructural observations indicated that the coating layer can affect the particle size distribution and morphology. The Taguchi method identified that the glutaraldehyde content is the most expressive parameter influencing the nanoparticles' properties, with the optimum properties achieved at chitosan, polyethylene glycol, and glutaraldehyde of 0.4 g, 0.08 g, and 1.2 ml, respectively. The antibacterial analysis confirmed the promising potential of the coated nanoparticles for biomedical applications. Furthermore, the magnetic heating efficiency of the synthesized nanoparticles was investigated in various concentrations of magnetic fluid, demonstrating their suitability for magnetic hyperthermia application.