Microstructural characterisation and compound formation in rapidly solidified SiGe alloy

被引:0
|
作者
Al-Jenabi, Osama [1 ,2 ]
Aslam, Zabeada [3 ]
Cochrane, Robert F. [2 ]
Mullis, Andrew M. [2 ]
机构
[1] Univ Leeds, Sch Mech Engn, Leeds LS2 9JT, England
[2] Univ Leeds, Sch Chem & Proc Engn, Leeds LS2 9JT, England
[3] Univ Leeds, Bragg Ctr Mat Res, Leeds LS2 9JT, England
关键词
Thermoelectric alloy; Nonequilibrium solidification; Rapid quenching; Chemical ordering; Group IV semiconductors; COOLING RATE; GE; GERMANIUM; GROWTH; EMISSIVITY; EVOLUTION;
D O I
10.1016/j.jallcom.2024.174560
中图分类号
O64 [物理化学(理论化学)、化学物理学];
学科分类号
070304 ; 081704 ;
摘要
Severe Ge segregation to grain boundaries was observed in a Si-14.2 at% Ge thermoelectric alloy rapidly solidified using a drop-tube facility, manifesting itself as a series of regions with uniform stoichiometric compositions. The step change in composition at the interface between adjacent regions was ascribed to the formation of different SiGe pseudocompounds and contradicted the accepted thermodynamic description of the SiGe system as a continuous random solid solution. Rapid solidification increased, rather than decreased, the inhomogeneity degree of the solid product, and the Ge content of the most Ge-rich regions was positively correlated with the cooling rate, which suggested the absence of solute trapping. The transmission electron microscopy/selected area electron diffraction analysis of the most Ge-rich regions revealed superlattice spots indicative of chemical ordering. However, simple chemical ordering within a single diamond cubic unit cell could not explain the fact that most stoichiometries had compositions that were multiples of 5 at% Ge, which indicated the presence of superstructural ordering.
引用
收藏
页数:13
相关论文
共 50 条
  • [41] Microstructure evolution and nano-hardness modulation of rapidly solidified Ti-Al-Nb alloy
    Liang, C.
    Zhao, J. F.
    Chang, J.
    Wang, H. P.
    JOURNAL OF ALLOYS AND COMPOUNDS, 2020, 836 (836)
  • [42] Electrode properties of rapidly solidified Mg67Ni23Pd10 amorphous alloy
    Yamaura, S
    Kim, HY
    Kimura, H
    Inoue, A
    Arata, Y
    JOURNAL OF ALLOYS AND COMPOUNDS, 2002, 347 (1-2) : 239 - 243
  • [43] Microstructure formation mechanism of rapidly solidified ternary Co-Cu-Pb monotectic alloys
    Yan Na
    Wang Wei-Li
    Dai Fu-Ping
    Wei Bing-Bo
    ACTA PHYSICA SINICA, 2011, 60 (03)
  • [44] Precipitation and mechanical properties for rapidly solidified Al-Cu-Li alloy: Effect of pre-rolling
    Lv, Pinhui
    Wang, Richu
    Peng, Chaoqun
    Cai, Zhiyong
    Feng, Yan
    Wang, Xiaofeng
    JOURNAL OF ALLOYS AND COMPOUNDS, 2022, 929
  • [45] Effect of wheel speed on the microstructure and nanohardness of rapidly solidified Ti-48Al-2Cr alloy
    Zhu, Dongdong
    Dong, Duo
    Ni, Chenyuan
    Zhang, Defeng
    Zhou, Zhaozhong
    Wang, Hongwei
    Wei, Zunjie
    MATERIALS CHARACTERIZATION, 2015, 99 : 243 - 247
  • [46] Microstructure and mechanical properties of the Mg-Gd-Zn alloy prepared by sintering of rapidly-solidified ribbons
    Luo, Wenbo
    Guo, Yanke
    Xue, Zhiyong
    Han, Xiuzhu
    Kong, Qinke
    Mu, Minghao
    Zhang, Gaolong
    Mao, Weimin
    Ren, Yu
    SCIENTIFIC REPORTS, 2022, 12 (01)
  • [47] Towards optimizing cooling rate, microstructure, and compressive strength in rapidly solidified Cu-20Fe alloy
    Reyes, Rodrigo Andre Valenzuela
    de Gouveia, Guilherme Lisboa
    Spinelli, Jose Eduardo
    JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T, 2024, 32 : 697 - 705
  • [48] Glass formation and structure evolution in the rapidly solidified monatomic metallic liquid Pt under high pressure
    Lachtioui, Y.
    Kbirou, M.
    Saadouni, K.
    Sajieddine, M.
    Mazroui, M.
    CHEMICAL PHYSICS, 2020, 538
  • [49] Microstructure formation and electrical resistivity behavior of rapidly solidified Cu-Fe-Zr immiscible alloys
    Sun, Xiaojun
    He, Jie
    Chen, Bin
    Zhang, Lili
    Jiang, Hongxiang
    Zhao, Jiuzhou
    Hao, Hongri
    JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY, 2020, 44 : 201 - 208
  • [50] Surface quality characterisation of diamond cut V-groove structures made of rapidly solidified aluminium RSA-905
    Guo, Jiang
    Zhang, Jiong
    Wang, Hao
    Liu, Kui
    Kumar, A. Senthil
    PRECISION ENGINEERING-JOURNAL OF THE INTERNATIONAL SOCIETIES FOR PRECISION ENGINEERING AND NANOTECHNOLOGY, 2018, 53 : 120 - 133