Numerical simulation of aerodynamic performance of the wing with edge of attack and sinusoidal escape

被引:2
作者
Mohammed, Mustafa A. [1 ]
Husain, Marwah Ali [2 ]
机构
[1] Al Nahrain Univ, Coll Engn, Dept Mech Engn, Baghdad 64074, Iraq
[2] Alsalam Univ Coll, Dept Refrigerat & Air Conditioning Engn Tech, Baghdad 10001, Iraq
来源
JOURNAL OF THERMAL ENGINEERING | 2024年 / 10卷 / 03期
关键词
Aerodynamic Performance; Drag Coefficient; Edge of Attack and Sinusoidal Escape; Lifting Coefficient; Turbulence; Wings; LEADING-EDGE;
D O I
10.14744/thermal.0000814
中图分类号
O414.1 [热力学];
学科分类号
摘要
Wings are one of the engineering components that play a vital role in the aerospace industry. Therefore, increasing the performance of the wings can improve the overall performance of the airplanes. One way to increase wing performance is to use sinusoidal curvature at the attack edge and wing escape, which delays the phenomenon of fatigue and improves aerodynamic performance at high attack angles. This study is to provide a better understanding of the aerodynamic characteristics of a finite NACA0012 wing with the performance of a wing with different types of wings with sinusoidal attack edge, sinusoidal escape edge, and compared them with simple wing. ANSYS FLUENT method has been used to simulate the wings. In addition to, the TRANSITION SST-4EQ method has also been used to solve the governing equations. The aerodynamic performance of a wing with the performance of different types of wings with sinusoidal attack edge, sinusoidal escape edge, and simple wing with NACA0012 cross section are investigated in Reynolds numbers of 5000, 15000 and 60,000 numerically. The kinetic energy distribution of turbulence on the wing body in these Reynolds numbers has been investigated. The amount of coefficients for and after different wings in Reynolds number 15000 with changing angle has been analyzed. In unstable conditions, compressibility and non-viscosity have been compared. According to the present study, it was observed that the maximum pressure around the wing is sinusoidal and the wing with a combined design is higher than the simple wing. The drag is related to the wing with the combined design, although this geometry has the highest value of drag in the article with other types of wings.
引用
收藏
页码:697 / 709
页数:13
相关论文
共 20 条
[1]  
Abo-Serie E, 2017, J THERM ENG, V3, P1527, DOI 10.18186/journal-of-thermal-engineering.353657
[2]  
Ahmed T, 2014, Glob J Res Engineer, V13, P4
[3]   Experimental investigations of flow over NACA airfoils 0021 and 4412 of wind turbine blades with and without Tubercles [J].
Butt, Usman ;
Hussain, Shafqat ;
Schacht, Stephan ;
Ritschel, Uwe .
WIND ENGINEERING, 2022, 46 (01) :89-101
[4]   Effects of sinusoidal leading edge on delta wing performance and mechanism [J].
Chen Huang ;
Pan Chong ;
Wang JinJun .
SCIENCE CHINA-TECHNOLOGICAL SCIENCES, 2013, 56 (03) :772-779
[5]  
Chung T., 2002, COMPUTATIONAL FLUID, DOI [10.1017/CBO9780511606205, DOI 10.1017/CBO9780511606205]
[6]   Hydrodynamic flow control in marine mammals [J].
Fish, Frank E. ;
Howle, Laurens E. ;
Murray, Mark M. .
INTEGRATIVE AND COMPARATIVE BIOLOGY, 2008, 48 (06) :788-800
[7]   Effects of wing flexibility on aerodynamic performance of an aircraft model [J].
Guo, Qinfeng ;
He, Xi ;
Wang, Zhuo ;
Wang, Jinjun .
CHINESE JOURNAL OF AERONAUTICS, 2021, 34 (09) :133-142
[8]   Evolution of the streamwise vortices generated between leading edge tubercles [J].
Hansen, Kristy L. ;
Rostamzadeh, Nikan ;
Kelso, Richard M. ;
Dally, Bassam B. .
JOURNAL OF FLUID MECHANICS, 2016, 788 :730-766
[9]  
Hassan M, 2022, Int J Thermofluids
[10]   Aerodynamic performance of owl-like airfoil undergoing bio-inspired flapping kinematics [J].
Lang, Xinyu ;
Song, Bifeng ;
Yang, Wenqing ;
Song, Wenping .
CHINESE JOURNAL OF AERONAUTICS, 2021, 34 (05) :239-252