3D monolithic composites TiO2/HKUST-1/RGO@melamine foam with improved surface mass transfer for efficient photocatalytic degradation of toluene gas

Currently, photocatalytic technology mostly uses powdered TiO2 catalysts, which are not conducive to recycling, limit the contact between volatile organic compounds (VOCs) and the photocatalyst, and result in lower mass transfer efficiency in gas-solid reactions. Meanwhile, TiO2 catalysts including the electrospun TiO2 nanofibers with hydrophilic surfaces are not favorable for the infiltration and adsorption of non-polar VOCs. To solve these problems, in this work, the monolithic composites TiO2/HKUST-1/RGO@melamine foam (named MRTH) with improved surface mass transfer composed of metal-organic framework (HKUST-1), graphene oxide (GO) and electrospun TiO2 nanofibers was designed. The metal-organic framework HKUST-1 plays a role in promoting the adsorption of toluene, while the reduced graphene oxide (RGO) facilitates the infiltration of non-polar molecules on the surface of the composite and has better electron transport capability. A type II heterojunction between the electrospun TiO2 nanofibers and HKUST-1 formed in the monolithic composites suppresses the recombination of electron-hole pairs and extends their lifespan. Comparing with the bare electrospun TiO2 nanofibers, the MRTH foam composites exhibit a wider light absorption range, hydrophilic and oleophobic properties and a higher separation efficiency of photogenerated carriers. In 90 min of dark adsorption, the removal rate of toluene over MRTH-8 was 52.32 %, while under irradiation by xenon lamp for 150 min, the removal rate over MRTH-8 reached 90.15 %. The amount of monolithic foam composites can also be easily adjusted in the reactor to achieve the best possible removal of the contaminant. The prepared composite materials have been characterized in detail, and the possible mechanisms have also been discussed. The foam composites prepared in this work have high catalytic activity and gas-solid reaction mass transfer efficiency, so they have wide practical application prospects in the field of VOCs abatement.