A low profile high gain concave conformal ring cylindrical dielectric resonator antenna loaded with split ring resonator for ISM and C band applications

A low profile, concave conformal ring cylindrical dielectric resonator antenna (CDRA) employing frequency selective surface (FSS) using split ring resonator (SRR) for wideband and high gain applications is presented. The ring CDRA loaded with the monopole is designed to excite the TM01 delta mode to increase the antenna's bandwidth. The effect of a curved ground plane (GP) on the radiation performance of CDRA is studied. A 5 x 5 array of the SRR is placed above the conformal GP at a far-field distance optimized to (2n +/- 1) lambda/4 from the radiating element to enhance the gain of the proposed structure. The planar CDRA with FSS is compared with the conformal CDRA with FSS and a 4.3 GHz improvement in bandwidth is observed due to the multiple reflection and surface reflection leading to a 3.2 dBi improvement in gain. An impedance bandwidth of 51.8% (5 to 8.5 GHz) with a maximum gain of 8.7 dBi at 7.3 GHz resonant frequency and 99% radiation efficiency at 5.9 GHz is offered by the proposed antenna with FSS. Additionally, the proposed CDRA has a low profile of 0.12 lambda 0 where lambda 0 is the lower cut-off frequency's wavelength. A good agreement is observed between the simulated and measured results. A low profile, concave conformal ring cylindrical dielectric resonator antenna (CDRA) employing frequency selective surface (FSS) using split ring resonator (SRR) is presented. The ring CDRA loaded with the monopole is designed to excite the TM01 delta mode to increase the antenna's bandwidth and the effect of curved ground plane (GP) on the radiation performance of CDRA is studied. A 5 x 5 array of the SRR is placed above the conformal GP to enhance the gain of the proposed structure. image