Extraction of gamma iron oxide ( γ-Fe 2 O 3 ) nanoparticles from waste can: Structure, morphology and magnetic properties

In this work, the transformation of waste iron cans to gamma iron oxide (gamma-Fe 2 O 3 ) nanoparticles following acid leaching precipitation method along with their structural, surface chemistry, and magnetic properties was studied. Highly magnetic iron -based nanomaterials, maghemite with high saturation magnetization have been synthesized through an acid leaching technique by carefully tuning of pH and calcination temperature. The phase composition and crystal structure, surface morphology, surface chemistry, and surface composition of the synthesized gamma-Fe 2 O 3 nanoparticles were explored by X-ray diffraction (XRD), Scanning electron microscopy (SEM), Xray photoelectron spectroscopy (XPS) and Energy -dispersive X-ray spectroscopy (EDS). The XRD results confirm the cubic spinel structure having crystallite size 26.90-52.15 nm. The XPS study reveals the presence of Fe, O element and the binding energy of Fe (710.31 and 724.48 eV) confirms the formation of gamma-Fe 2 O 3 as well. By dynamic light scattering (DLS) method and zeta potential analyzer, the particle size distribution and stability of the systems were investigated. The magnetic behavior of the synthesized gamma-Fe 2 O 3 nanoparticles were studied using a vibrating sample magnetometer (VSM) which confirmed the ferrimagnetic particles with saturation magnetization of 54.94 emu/g. The resultant maghemite nanoparticles will be used in photocatalysts and humidity sensing. The net impact of the work stated here is based on the principle of converting waste into useful nanomaterials. Finally, it was concluded that our results can give insights into the design of the synthesis procedure from the precursor to the high -quality gamma iron oxide nanoparticles with high saturation magnetization for different potential applications which are inexpensive and very simple.