Study of Slope Stability of the Mining Wall in an Open-Pit Coal Mine by the Paste Cut-and-Backfill Method

According to this study's findings, slope stability problems in open-pit coal mines can be avoided, and mine wall collapse can be effectively mitigated by the use of cut-and-backfill mining techniques. The main research results are as follows: (1) The stope and waste rock's geotechnical, physical, and mechanical characteristics were gathered and examined; the geotechnical and mechanical characteristics found in this study largely satisfy the criteria for slope stability analysis. (2) Cemented paste backfill (CPB) materials were made of mine waste rock and fly ash at a desired ratio, mixed with cement as a bond material, and were tested in the laboratory, using a combination of cement percentages of 6%, 8%, and 10% for the cement content and 25%, 30%, 35%, and 40% for the fly ash content, to determine the ideal mix for artificial ground support in underground mines, taking into account both economic and performance factors. (3) By using this model, the changes in CPB strength were investigated under various factors influencing the cement ratio, and limit equilibrium modeling was used with the FLAC-Slope 8.1 program with different cement paste backfill ratio to calculate the factor of safety for each cement percentage after 1 day, 3 days, 7 days, and 28 days of curing time (CT) to obtain the optimum compressive strength and shear straight of cemented paste backfill with high paste fill shear strength on the slope. (4) The research results are of great significance for the safety of important facilities in open-pit mines and provide a basis for the design and safety implementation of open-pit slope engineering.