Influence of Crosslinking Concentration on the Properties of Biodegradable Modified Cassava Starch-Based Films for Packaging Applications

Chitosan/modified cassava starch/curcumin (CS/S/Cur) films with a crosslinker were developed via the solvent casting technique for the application of food packaging. The effects of citric acid (CA) as a natural crosslinker were assessed at different concentrations (0-10.0%, w/w, on a dry base on CS and S content). To measure the most favorable film, chemical structure and physical, mechanical, and thermal properties were investigated. Successful crosslinking between CS and S was seen clearly in the Fourier Transform Infrared (FTIR) spectra. The properties of the water resistance of the CS/S/Cur films crosslinked with CA were enhanced when compared to those without CA. Furthermore, it was found that the addition of CA crosslinking would improve the mechanical properties of composite films to some extent. It had been reported that the CA crosslinking level of 7.5 wt% of CS/S/Cur film demonstrated high performance in terms of physical properties. The tensile strength of the crosslinked film increased from 8 +/- 1 MPa to 12 +/- 1 MPa with the increasing content of CA, while water vapor permeability (WVP), swelling degree (SD), and water solubility (WS) decreased. An effective antioxidant scavenging activity of the CS/S/Cur film decreased with an increase in CA concentrations. This study provides an effective pathway for the development of active films based on polysaccharide-based film for food packaging applications.