CHEMICAL KINETIC STUDY ON REACTION PATHWAY OF ANISOLE OXIDATION AT VARIOUS OPERATING CONDITION

被引:0
|
作者
Roy, Shrabanti [1 ]
Askari, Omid [1 ]
机构
[1] Mississippi State Univ, Dept Mech Engn, Starkville, MS 39759 USA
来源
PROCEEDINGS OF THE ASME 2020 INTERNATIONAL MECHANICAL ENGINEERING CONGRESS AND EXPOSITION, IMECE2020, VOL 8 | 2020年
关键词
Chemical kinetics; reaction mechanism generator; sensitivity analysis; reaction rate coefficient; anisole; LAMINAR BURNING SPEEDS; THERMAL-DECOMPOSITION; FLAME STRUCTURE; IGNITION DELAY; LIGNOCELLULOSIC BIOMASS; REACTION-MECHANISM; DETAILED KINETICS; PYROLYSIS; COMBUSTION; FUELS;
D O I
暂无
中图分类号
TE [石油、天然气工业]; TK [能源与动力工程];
学科分类号
0807 ; 0820 ;
摘要
Biofuels are considered as an alternative source of energy which can decrease the growing consumption of fossil fuel, hence decreasing pollution. Anisole (methoxybenzene) is a potential source of biofuel produced from cellulose base compounds. It is mostly available as a surrogate of phenolic rich compound. Because of the attractive properties of this fuel in combustion, it is important to do detail kinetic study on oxidation of anisole. In this study a detail chemical mechanism is developed to capture the chemical kinetics of anisole oxidation. The mechanism is developed using an automatic reaction mechanism generator (RMG). To generate the mechanism, RMG uses some known set of species and initial conditions such as temperature, pressure, and mole fractions. Proper thermodynamic and reaction library is used to capture the aromaticity of anisole. The generated mechanism has 340 species and 2532 reactions. Laminar burning speed (LBS) calculated through constant volume combustion chamber (CVCC) at temperature ranges from 460-550 K, pressure of 23 atm and equivalence ratio of 0.8-1.4 is used to validate the generated mechanism. Some deviation with experimental result is observed with the newly generated mechanism. Important reaction responsible for LBS calculation, is selected through sensitivity analysis. Rate coefficient of sensitive reactions are collected from literature to modify and improve the mechanism with experimental result. The generated mechanism is further validated with available ignition delay time (IDT) results ranging from 10-20 atm pressure, 0.5-1 equivalence ratio and 870-1600 K temperature. A good agreement of results is observed at different operating ranges. Oxidation of anisole at stoichiometric condition and atmospheric pressure in jet stirred reactor is also used to compare the species concentration of the mechanism. This newly generated mechanism is considered as a good addition for further study of anisole kinetics.
引用
收藏
页数:8
相关论文
共 50 条
  • [41] Experimental and chemical kinetic modeling study of high-temperature oxidation of diisopropyl methylphosphonate (DIMP)- A sarin simulant
    Rahman, Ramees K.
    Wang, Chun-Hung
    Masunov, Artem E.
    Vasu, Subith
    COMBUSTION AND FLAME, 2023, 255
  • [42] A Kinetic Study of a Photo-Oxidation Reaction between α-Terpinene and Singlet Oxygen in a Novel Oscillatory Baffled Photo Reactor
    Chen, Jianhan
    Prinsloo, Rohen
    Ni, Xiongwei
    TECHNOLOGIES, 2024, 12 (03)
  • [43] Experimental and chemical kinetic study on the low temperature oxidation of 1,3-butadiene in a jet-stirred reactor
    Yin, Geyuan
    Lv, Xin
    Hu, Erjiang
    Xiao, Bo
    Shen, Huixian
    Huang, Zuohua
    FUEL, 2022, 315
  • [44] Study on oxidation and pyrolysis of carbonate esters using a micro flow reactor with a controlled temperature profile. Part II: Chemical kinetic modeling of ethyl methyl carbonate
    Takahashi, Shintaro
    Kanayama, Keisuke
    Morikura, Shota
    Nakamura, Hisashi
    Tezuka, Takuya
    Maruta, Kaoru
    COMBUSTION AND FLAME, 2022, 238
  • [45] Modeling soot particles as stable radicals: a chemical kinetic study on formation and oxidation. Part II. Soot oxidation in flow reactors and laminar flames
    Nobili, Andrea
    Pejpichestakul, Warumporn
    Pelucchi, Matteo
    Cuoci, Alberto
    Cavallotti, Carlo
    Faravelli, Tiziano
    COMBUSTION AND FLAME, 2022, 243
  • [46] Spectroscopic and Kinetic Study of Cyclohexane Oxidation Reaction in Vapor Phase over the Catalyst 20FeMnOδ/(3CeAl)
    Yadav, Vijendra Kumar
    Chauhan, Krunalsinh Y.
    Das, Taraknath
    INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH, 2023, 62 (47) : 20170 - 20188
  • [47] Experimental and chemical kinetic modeling study of small methyl esters oxidation: Methyl (E)-2-butenoate and methyl butanoate
    Gail, S.
    Sarathy, S. M.
    Thomson, M. J.
    Dievart, P.
    Dagaut, P.
    COMBUSTION AND FLAME, 2008, 155 (04) : 635 - 650
  • [48] An experimental and chemical kinetic modeling study of octane isomer oxidation. Part 2: 223-and 224-trimethylpentane
    Wang, Pengzhi
    Kenny, Gavin
    Heng, Yijun
    Dong, Shijun
    Ghosh, Manik Kumer
    Curran, Henry J.
    COMBUSTION AND FLAME, 2024, 263
  • [49] Catalytic hydrotreatment of lignin-derived pyrolysis bio-oils using Cu/γ-Al2O3 catalyst: Reaction network development and kinetic study of anisole upgrading
    Saidi, Majid
    Moradi, Pantea
    INTERNATIONAL JOURNAL OF ENERGY RESEARCH, 2021, 45 (06) : 8267 - 8284
  • [50] Kinetic study of the nitric oxide oxidation between 288 and 323 K, under pressure, focus on the oxygen influence on the reaction rate constant
    Neyrolles, Esther
    Lara Cruz, Jose
    Bassil, Georgio
    Contamine, Francois
    Cezac, Pierre
    Arpentinier, Philippe
    INTERNATIONAL JOURNAL OF CHEMICAL KINETICS, 2020, 52 (05) : 329 - 340