CHEMICAL KINETIC STUDY ON REACTION PATHWAY OF ANISOLE OXIDATION AT VARIOUS OPERATING CONDITION

被引:0
|
作者
Roy, Shrabanti [1 ]
Askari, Omid [1 ]
机构
[1] Mississippi State Univ, Dept Mech Engn, Starkville, MS 39759 USA
来源
PROCEEDINGS OF THE ASME 2020 INTERNATIONAL MECHANICAL ENGINEERING CONGRESS AND EXPOSITION, IMECE2020, VOL 8 | 2020年
关键词
Chemical kinetics; reaction mechanism generator; sensitivity analysis; reaction rate coefficient; anisole; LAMINAR BURNING SPEEDS; THERMAL-DECOMPOSITION; FLAME STRUCTURE; IGNITION DELAY; LIGNOCELLULOSIC BIOMASS; REACTION-MECHANISM; DETAILED KINETICS; PYROLYSIS; COMBUSTION; FUELS;
D O I
暂无
中图分类号
TE [石油、天然气工业]; TK [能源与动力工程];
学科分类号
0807 ; 0820 ;
摘要
Biofuels are considered as an alternative source of energy which can decrease the growing consumption of fossil fuel, hence decreasing pollution. Anisole (methoxybenzene) is a potential source of biofuel produced from cellulose base compounds. It is mostly available as a surrogate of phenolic rich compound. Because of the attractive properties of this fuel in combustion, it is important to do detail kinetic study on oxidation of anisole. In this study a detail chemical mechanism is developed to capture the chemical kinetics of anisole oxidation. The mechanism is developed using an automatic reaction mechanism generator (RMG). To generate the mechanism, RMG uses some known set of species and initial conditions such as temperature, pressure, and mole fractions. Proper thermodynamic and reaction library is used to capture the aromaticity of anisole. The generated mechanism has 340 species and 2532 reactions. Laminar burning speed (LBS) calculated through constant volume combustion chamber (CVCC) at temperature ranges from 460-550 K, pressure of 23 atm and equivalence ratio of 0.8-1.4 is used to validate the generated mechanism. Some deviation with experimental result is observed with the newly generated mechanism. Important reaction responsible for LBS calculation, is selected through sensitivity analysis. Rate coefficient of sensitive reactions are collected from literature to modify and improve the mechanism with experimental result. The generated mechanism is further validated with available ignition delay time (IDT) results ranging from 10-20 atm pressure, 0.5-1 equivalence ratio and 870-1600 K temperature. A good agreement of results is observed at different operating ranges. Oxidation of anisole at stoichiometric condition and atmospheric pressure in jet stirred reactor is also used to compare the species concentration of the mechanism. This newly generated mechanism is considered as a good addition for further study of anisole kinetics.
引用
收藏
页数:8
相关论文
共 50 条
  • [21] Detailed Chemical Kinetic Study of Acetaldehyde Oxidation and Its Interaction with NOx
    Shrestha, Krishna Prasad
    Giri, Binod Raj
    Adil, Mohammad
    Seidel, Lars
    Zeuch, Thomas
    Farooq, Aamir
    Mauss, Fabian
    ENERGY & FUELS, 2021, 35 (18) : 14963 - 14983
  • [22] ReaxFF MD and detailed reaction kinetic study on the thermal cracking and partial combustion of anisole: a biomass model tar compound
    Hu, Ming
    Zhao, Shanhui
    Luo, Yonghao
    RSC ADVANCES, 2023, 13 (51) : 36188 - 36199
  • [23] A comprehensive experimental and detailed chemical kinetic modelling study of 2,5-dimethylfuran pyrolysis and oxidation
    Somers, Kieran P.
    Simmie, John M.
    Gillespie, Fiona
    Conroy, Christine
    Black, Grainne
    Metcalfe, Wayne K.
    Battin-Leclerc, Frederique
    Dirrenberger, Patricia
    Herbinet, Olivier
    Glaude, Pierre-Alexandre
    Dagaut, Philippe
    Togbe, Casimir
    Yasunaga, Kenji
    Fernandes, Ravi X.
    Lee, Changyoul
    Tripathi, Rupali
    Curran, Henry J.
    COMBUSTION AND FLAME, 2013, 160 (11) : 2291 - 2318
  • [24] Experimental and chemical kinetic study of the pyrolysis of trifluoroethane and the reaction of trifluoromethane with methane
    Han, Wenfeng
    Kennedy, Eric M.
    Kundu, Sazal K.
    Mackie, John C.
    Adesina, Adesoji A.
    Dlugogorski, Bogdan Z.
    JOURNAL OF FLUORINE CHEMISTRY, 2010, 131 (07) : 751 - 760
  • [25] A Shock Tube and Chemical Kinetic Modeling Study of Methy Ethyl Ketone Oxidation
    Serinyel, Z.
    Black, G.
    Curran, H. J.
    Simmie, J. M.
    COMBUSTION SCIENCE AND TECHNOLOGY, 2010, 182 (4-6) : 574 - 587
  • [26] Experimental kinetic study of the oxidation of p-xylene in a JS']JSR and comprehensive detailed chemical kinetic modeling
    Gaïl, S
    Dagaut, P
    COMBUSTION AND FLAME, 2005, 141 (03) : 281 - 297
  • [27] A chemical kinetic study of the oxidation of dibutyl-ether in a jet-stirred reactor
    Thion, Sebastien
    Togbe, Casimir
    Serinyel, Zeynep
    Dayma, Guillaume
    Dagaut, Philippe
    COMBUSTION AND FLAME, 2017, 185 : 4 - 15
  • [28] Experimental and chemical kinetic modeling study of ethylene carbonate oxidation: A lithium-ion battery electrolyte surrogate model
    Kanayama, Keisuke
    Gregoire, Claire M.
    Cooper, Sean P.
    Almarzooq, Yousef
    Petersen, Eric L.
    Mathieu, Olivier
    Maruta, Kaoru
    Nakamura, Hisashi
    COMBUSTION AND FLAME, 2024, 262
  • [29] Quantum chemical and kinetic study of the CCl2 self-recombination reaction
    Gomez, Nicolas D.
    Codnia, Jorge
    Azcarate, Maria L.
    Cobos, Carlos J.
    COMPUTATIONAL AND THEORETICAL CHEMISTRY, 2017, 1121 : 1 - 10
  • [30] Oxidation of 1-methylnaphthalene at 1-13 atm: Experimental study in a JS']JSR and detailed chemical kinetic modeling
    Mati, Karim
    Ristori, Alain
    Pengloan, Gaelle
    Dagaut, Philippe
    COMBUSTION SCIENCE AND TECHNOLOGY, 2007, 179 (07) : 1261 - 1285