Effects of Er addition on the hot deformation behavior and microstructure evolution of AZ31 alloy

AZ31 magnesium alloys typically have poor room temperature ductility after initial deformation. To address this disadvantage, rare earth element Er is introduced to regulate the structure, weaken texture, and promote nonbasal slip to achieve plasticization. In this study, the deformation behavior and microstructure evolution during the hot compression process of Er added AZ31 alloy were systematically investigated. Hot compression stressstrain curves showed that the addition of Er reduced the deformation resistance. The constitutive equation and processing map were established. By combining the processing map with the microstructure analysis and texture evolution, an optimal processing area was determined to be 350-400 degree celsius at a strain rate of 0.01 s(-1). The influence of Er addition on the twinning behavior, recrystallization mechanism, and slip system of the AZ31 alloy were discussed. During the deformation process, the twinning behavior violates the maximum SF criterion, which is related to severe local stress. Continuous dynamic recrystallization, discontinuous dynamic recrystallization, and twinning induced recrystallization are all detected in the alloy. Through the in-grain misorientation axis and transmission electron microscopy, it can be confirmed that the addition of Er promoted the occurrence of pyramidal <c+a> slip. This is related to the modification of stacking fault energy by Er and the hindrance effect of the second phase containing Er on the basal dislocation.