Effect of Rotational Shear and Heat Input on the Microstructure and Mechanical Properties of Large-Diameter 6061 Aluminium Alloy Additive Friction Stir Deposition

被引:2
|
作者
Zhu, Xiaohu [1 ]
Wang, Rui [1 ]
Wang, Lin [1 ]
Liu, Mengmeng [1 ]
Li, Songmo [1 ]
机构
[1] Harbin Inst Technol, Sch Ocean Engn, 2 Wenhuaxi Rd, Weihai 264200, Peoples R China
关键词
additive friction stir deposition; 6061 aluminium alloy; continuous dynamic recrystallisation; microstructure; mechanical properties; RESEARCH PROGRESS; RECRYSTALLIZATION; BEHAVIOR; TEXTURE;
D O I
10.3390/cryst14070581
中图分类号
O7 [晶体学];
学科分类号
0702 ; 070205 ; 0703 ; 080501 ;
摘要
Additive friction stir deposition (AFSD), in which molten metal materials are formed into free-form stacked structural parts according to the path design, may have a wide range of applications in high-efficiency mass production. In this study, experiments were conducted for the rotational speed in the AFSD parameters of 6061 aluminium alloy bars to investigate the effects of different rotational shear conditions and heat inputs on the properties of the deposited layer for diameter bars based on the analysis of the micro-morphology, micro-tissue composition, and mechanical properties. The width and thickness of each layer were constant, approximately 40 mm wide and 2.5 mm thick. The particle undulations on the surface of the deposited layer were positively correlated with the AFSD rotational speed. Continuous dynamic recrystallisation in the AFSD process can achieve more than 90% grain refinement. When the rotational speed increases, it causes localised significant orientation and secondary deformation within the recrystallised grains. The ultimate tensile strength of the deposited layer was positively correlated with the rotational speed, reaching a maximum of 211 MPa, and the elongation was negatively correlated with the rotational speed, with a maximum material elongation of 37%. The cross-section hardness of the deposited layer was negatively correlated with the number of thermal cycles, with the lowest hardness being about 45% of the base material and the highest hardness being about 80% of the base material.
引用
收藏
页数:20
相关论文
共 50 条
  • [21] Effect of tool pin profile and tool rotational speed on mechanical properties of Friction Stir Welded AA6061 aluminium alloy
    Elangovan, K.
    Balasubramanian, V.
    Valliappan, M.
    MATERIALS AND MANUFACTURING PROCESSES, 2008, 23 (3-4) : 251 - 260
  • [22] The Effect of Anodization on the Mechanical Properties of AA6061 Produced by Additive Friction Stir-Deposition
    Zhu, Ning
    Avery, Dustin Z.
    Rutherford, Ben A.
    Phillips, Brandon J.
    Allison, Paul G.
    Jordon, J. Brian
    Brewer, Luke N.
    METALS, 2021, 11 (11)
  • [23] Effects of heat treatments on the microstructure and mechanical properties of a 6061 aluminium alloy
    Maisonnette, D.
    Suery, M.
    Nelias, D.
    Chaudet, P.
    Epicier, T.
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2011, 528 (06): : 2718 - 2724
  • [24] Elucidating the Effect of Additive Friction Stir Deposition on the Resulting Microstructure and Mechanical Properties of Magnesium Alloy WE43
    Williams, M. B.
    Robinson, T. W.
    Williamson, C. J.
    Kinser, R. P.
    Ashmore, N. A.
    Allison, P. G.
    Jordon, J. B.
    METALS, 2021, 11 (11)
  • [25] Effect of rotational speeds on microstructure and mechanical properties of friction stir-welded 7075-T6 aluminium alloy
    Rezaei, H.
    Mirbeik, M. H.
    Bisadi, H.
    PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART C-JOURNAL OF MECHANICAL ENGINEERING SCIENCE, 2011, 225 (C8) : 1761 - 1773
  • [26] Microstructure and Mechanical Properties of Additive Friction Stir Deposition for AA2024-T3 Alloy
    Wang, Ruilin
    Yang, Xinqi
    Tang, Wenshen
    Luo, Ting
    Jixie Gongcheng Xuebao/Journal of Mechanical Engineering, 2024, 60 (18): : 146 - 153
  • [27] Additive friction stir deposition of an Al-Cu-Mg alloy: Microstructure evolution and mechanical properties
    Feng, Xiangnan
    Zhang, Mingtao
    Jiang, Tao
    Xie, Yunfei
    Sun, Zhonggang
    Li, Wenya
    MATERIALS CHARACTERIZATION, 2024, 218
  • [28] Effect of reinforcement particles and multipass of friction stir processing on microstructure and mechanical properties of aluminium alloy
    Ansari, Abdul Jabbar
    Bansal, Gagan
    Rizvi, Syed Asghar Husain
    MATERIALS LETTERS, 2024, 355
  • [29] Effect of electrically assisted friction stir welding on microstructure and mechanical properties of 2219 aluminium alloy
    Bai Y.-F.
    Jiang X.-Q.
    Chen S.-J.
    Zhang H.-W.
    Han Y.
    Yuan T.
    Zhongguo Youse Jinshu Xuebao/Chinese Journal of Nonferrous Metals, 2021, 31 (03): : 556 - 565
  • [30] Effects of friction stir welding on microstructure and mechanical properties of 6063 aluminium alloy
    Sashank, J. Sai
    Sampath, P.
    Krishna, P. Sai
    Sagar, R.
    Venukumar, S.
    Muthukumaran, S.
    MATERIALS TODAY-PROCEEDINGS, 2018, 5 (02) : 8348 - 8353